NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Mushkin Enhanced
A 64 GB dual-channel DDR5 kit with two 32 GB modules running at 4800 MT/s and CL40 timings at 1.1 V
This Mushkin Enhanced Redline kit provides 64GB of DDR5 memory in a matched 2x32GB configuration. It targets desktop builders who need high capacity for content creation, virtualization or heavy multitasking. The modules run at the standard 4800 MT/s JEDEC speed with 1.1V operation. No extra software or manual tuning is required to reach the rated frequency.
The CAS latency, RAS-to-CAS delay and RAS precharge are all set to 40 cycles at the rated 4800 MT/s data rate. These timings remain stable during extended rendering, compilation or scientific workloads because the modules operate at the baseline JEDEC voltage. Bandwidth does not throttle when the CPU holds the memory controller at peak utilisation for long periods. The dual-rank 32GB density per stick keeps all channels populated without exceeding typical consumer platform limits.
Operating at 1.1V keeps power draw low and heat output modest even when all 64GB are active continuously. The modules use a low-profile aluminium heatspreader that dissipates heat passively without adding fan noise. Typical case airflow is sufficient to maintain safe temperatures during prolonged heavy use. The combination of standard voltage and efficient layout means the kit adds minimal load to the system power budget.
Šai precei pagaidām nav publicētu specifikāciju.
The modules run at the standard DDR5 voltage of 1.1 V, which helps limit power draw and heat output during continuous operation, so system fans can stay quieter.
Your motherboard needs DDR5 UDIMM slots; the kit installs in two slots and requires a platform that supports DDR5 memory.
When mixed with slower DDR5 modules, the system will run all memory at the lowest common speed and timings, so the CL40 kit will downclock to match the slower sticks.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?