NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Mushkin Enhanced
A 64 GB dual-channel DDR5 kit with two 32 GB modules running at 4800 MT/s and CL40 timings at 1.1 V
This Mushkin Enhanced Redline kit provides 64GB of DDR5 memory in a matched 2x32GB configuration. It targets desktop builders who need high capacity for content creation, virtualization or heavy multitasking. The modules run at the standard 4800 MT/s JEDEC speed with 1.1V operation. No extra software or manual tuning is required to reach the rated frequency.
The CAS latency, RAS-to-CAS delay and RAS precharge are all set to 40 cycles at the rated 4800 MT/s data rate. These timings remain stable during extended rendering, compilation or scientific workloads because the modules operate at the baseline JEDEC voltage. Bandwidth does not throttle when the CPU holds the memory controller at peak utilisation for long periods. The dual-rank 32GB density per stick keeps all channels populated without exceeding typical consumer platform limits.
Operating at 1.1V keeps power draw low and heat output modest even when all 64GB are active continuously. The modules use a low-profile aluminium heatspreader that dissipates heat passively without adding fan noise. Typical case airflow is sufficient to maintain safe temperatures during prolonged heavy use. The combination of standard voltage and efficient layout means the kit adds minimal load to the system power budget.
Aún no hay especificaciones publicadas para este artículo.
The modules run at the standard DDR5 voltage of 1.1 V, which helps limit power draw and heat output during continuous operation, so system fans can stay quieter.
Your motherboard needs DDR5 UDIMM slots; the kit installs in two slots and requires a platform that supports DDR5 memory.
When mixed with slower DDR5 modules, the system will run all memory at the lowest common speed and timings, so the CL40 kit will downclock to match the slower sticks.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?