NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Mushkin Enhanced
A 64 GB dual-channel DDR5 kit with two 32 GB modules running at 4800 MT/s and CL40 timings at 1.1 V
This Mushkin Enhanced Redline kit provides 64GB of DDR5 memory in a matched 2x32GB configuration. It targets desktop builders who need high capacity for content creation, virtualization or heavy multitasking. The modules run at the standard 4800 MT/s JEDEC speed with 1.1V operation. No extra software or manual tuning is required to reach the rated frequency.
The CAS latency, RAS-to-CAS delay and RAS precharge are all set to 40 cycles at the rated 4800 MT/s data rate. These timings remain stable during extended rendering, compilation or scientific workloads because the modules operate at the baseline JEDEC voltage. Bandwidth does not throttle when the CPU holds the memory controller at peak utilisation for long periods. The dual-rank 32GB density per stick keeps all channels populated without exceeding typical consumer platform limits.
Operating at 1.1V keeps power draw low and heat output modest even when all 64GB are active continuously. The modules use a low-profile aluminium heatspreader that dissipates heat passively without adding fan noise. Typical case airflow is sufficient to maintain safe temperatures during prolonged heavy use. The combination of standard voltage and efficient layout means the kit adds minimal load to the system power budget.
Nicio specificație publicată pentru acest articol deocamdată.
The modules run at the standard DDR5 voltage of 1.1 V, which helps limit power draw and heat output during continuous operation, so system fans can stay quieter.
Your motherboard needs DDR5 UDIMM slots; the kit installs in two slots and requires a platform that supports DDR5 memory.
When mixed with slower DDR5 modules, the system will run all memory at the lowest common speed and timings, so the CL40 kit will downclock to match the slower sticks.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?