Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular metal enclosure, 200 by 100 by 45 mm, 12 V 30 A 360 W AC-DC power supply

myVolts

myVolts 12 V 30 A 360 W AC-DC power supply

SKU CH-11RW-85Z2B

Converts AC mains to 12 V DC at up to 30 A with over-voltage, over-current and short-circuit protection

  • TypeAT
  • Delivers 360 W at 12 V for demanding loads
  • Wide AC 110 V to 240 V input suits global mains
  • Over-voltage, over-current and short-circuit protection guards equipment
  • Metal case aids heat dissipation in 0 °C to 40 °C operation
  • Indoor-rated design with CCC, RoHS and CE compliance

12 V 30 A industrial power supply

This AC-DC switching unit converts mains input to a regulated 12 V DC output rated at 30 A and 360 W. It is built for indoor equipment that requires a stable 12 volt rail, such as LED lighting arrays, CNC controllers or test bench gear. The metal enclosure aids heat dissipation in continuous-duty scenarios.

Input range and protection limits

The supply accepts 110 V or 220 V AC with a ±15 % tolerance, covering common single-phase mains worldwide. Built-in safeguards include over-voltage, over-current and short-circuit protection that latch off the output until the fault is cleared. Operating temperature is specified from 0 °C to 40 °C with humidity up to 95 % non-condensing.

30 A maximum continuous current

The 30 A rating is the decisive figure: the load must not exceed this value or the protection will trip and interrupt power. Systems drawing higher peak or sustained current need a larger model such as the 40 A or 50 A variants. This unit is not suitable for applications that require redundant or hot-swap power architectures.

Priekšrocības

  • Delivers 360 W at 12 V for demanding loads
  • Wide AC 110 V to 240 V input suits global mains
  • Over-voltage, over-current and short-circuit protection guards equipment
  • Metal case aids heat dissipation in 0 °C to 40 °C operation
  • Indoor-rated design with CCC, RoHS and CE compliance

Specifikācijas

TypeAT

Jautājumi par šo preci

Which current rating should I choose for my 12 V load?

Match the supply to your peak draw: the 12 V 30 A 360 W unit covers up to 30 A continuous, while lower models such as 12 V 20 A 240 W or 12 V 15 A 180 W suit smaller loads.

What does the 360 W rating mean once the unit is installed?

It is the maximum continuous DC power the supply can deliver at 12 V, so a 30 A load will run at full rated output without exceeding the 360 W limit.

What input voltage range does the 30 A model accept and what does that cap?

The 30 A version operates on 110 V/220 V ±15 %, so it works on standard mains worldwide and its output is capped at 30 A and 360 W.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.