Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal enclosure, 200 by 100 by 45 mm, 12 V 30 A 360 W AC-DC power supply

myVolts

myVolts 12 V 30 A 360 W AC-DC power supply

SKU CH-11RW-85Z2B

Converts AC mains to 12 V DC at up to 30 A with over-voltage, over-current and short-circuit protection

  • TypeAT
  • Delivers 360 W at 12 V for demanding loads
  • Wide AC 110 V to 240 V input suits global mains
  • Over-voltage, over-current and short-circuit protection guards equipment
  • Metal case aids heat dissipation in 0 °C to 40 °C operation
  • Indoor-rated design with CCC, RoHS and CE compliance

12 V 30 A industrial power supply

This AC-DC switching unit converts mains input to a regulated 12 V DC output rated at 30 A and 360 W. It is built for indoor equipment that requires a stable 12 volt rail, such as LED lighting arrays, CNC controllers or test bench gear. The metal enclosure aids heat dissipation in continuous-duty scenarios.

Input range and protection limits

The supply accepts 110 V or 220 V AC with a ±15 % tolerance, covering common single-phase mains worldwide. Built-in safeguards include over-voltage, over-current and short-circuit protection that latch off the output until the fault is cleared. Operating temperature is specified from 0 °C to 40 °C with humidity up to 95 % non-condensing.

30 A maximum continuous current

The 30 A rating is the decisive figure: the load must not exceed this value or the protection will trip and interrupt power. Systems drawing higher peak or sustained current need a larger model such as the 40 A or 50 A variants. This unit is not suitable for applications that require redundant or hot-swap power architectures.

Kohokohdat

  • Delivers 360 W at 12 V for demanding loads
  • Wide AC 110 V to 240 V input suits global mains
  • Over-voltage, over-current and short-circuit protection guards equipment
  • Metal case aids heat dissipation in 0 °C to 40 °C operation
  • Indoor-rated design with CCC, RoHS and CE compliance

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Which current rating should I choose for my 12 V load?

Match the supply to your peak draw: the 12 V 30 A 360 W unit covers up to 30 A continuous, while lower models such as 12 V 20 A 240 W or 12 V 15 A 180 W suit smaller loads.

What does the 360 W rating mean once the unit is installed?

It is the maximum continuous DC power the supply can deliver at 12 V, so a 30 A load will run at full rated output without exceeding the 360 W limit.

What input voltage range does the 30 A model accept and what does that cap?

The 30 A version operates on 110 V/220 V ±15 %, so it works on standard mains worldwide and its output is capped at 30 A and 360 W.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.