Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular metal enclosure, 200 by 100 by 45 mm, 12 V 30 A 360 W AC-DC power supply

myVolts

myVolts 12 V 30 A 360 W AC-DC power supply

SKU CH-11RW-85Z2B

Converts AC mains to 12 V DC at up to 30 A with over-voltage, over-current and short-circuit protection

  • TypeAT
  • Delivers 360 W at 12 V for demanding loads
  • Wide AC 110 V to 240 V input suits global mains
  • Over-voltage, over-current and short-circuit protection guards equipment
  • Metal case aids heat dissipation in 0 °C to 40 °C operation
  • Indoor-rated design with CCC, RoHS and CE compliance

12 V 30 A industrial power supply

This AC-DC switching unit converts mains input to a regulated 12 V DC output rated at 30 A and 360 W. It is built for indoor equipment that requires a stable 12 volt rail, such as LED lighting arrays, CNC controllers or test bench gear. The metal enclosure aids heat dissipation in continuous-duty scenarios.

Input range and protection limits

The supply accepts 110 V or 220 V AC with a ±15 % tolerance, covering common single-phase mains worldwide. Built-in safeguards include over-voltage, over-current and short-circuit protection that latch off the output until the fault is cleared. Operating temperature is specified from 0 °C to 40 °C with humidity up to 95 % non-condensing.

30 A maximum continuous current

The 30 A rating is the decisive figure: the load must not exceed this value or the protection will trip and interrupt power. Systems drawing higher peak or sustained current need a larger model such as the 40 A or 50 A variants. This unit is not suitable for applications that require redundant or hot-swap power architectures.

Přednosti

  • Delivers 360 W at 12 V for demanding loads
  • Wide AC 110 V to 240 V input suits global mains
  • Over-voltage, over-current and short-circuit protection guards equipment
  • Metal case aids heat dissipation in 0 °C to 40 °C operation
  • Indoor-rated design with CCC, RoHS and CE compliance

Specifikace

TypeAT

Otázky k tomuto produktu

Which current rating should I choose for my 12 V load?

Match the supply to your peak draw: the 12 V 30 A 360 W unit covers up to 30 A continuous, while lower models such as 12 V 20 A 240 W or 12 V 15 A 180 W suit smaller loads.

What does the 360 W rating mean once the unit is installed?

It is the maximum continuous DC power the supply can deliver at 12 V, so a 30 A load will run at full rated output without exceeding the 360 W limit.

What input voltage range does the 30 A model accept and what does that cap?

The 30 A version operates on 110 V/220 V ±15 %, so it works on standard mains worldwide and its output is capped at 30 A and 360 W.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.