NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
myVolts
Compact 300 W AT module converts 12 V DC input to standard ATX power for Mini-ITX and 1U cases, with solid capacitors and full protection
This 12V DC-to-ATX power supply module delivers 300W of output power for Mini-ITX and 1U chassis. It accepts a 12V DC source between 11.4V and 12.6V and requires an external AC-DC adapter. Industrial solid capacitors provide stable operation from 0°C to 55°C with 85% efficiency. The board measures approximately 154mm by 35mm by 15mm, saving space in compact enclosures.
The module draws a maximum of 25A from the 12V DC input, so the accompanying adapter must supply at least that current. Over-current and short-circuit protections guard connected components against electrical faults. An operating humidity range of 45% to 75% and atmospheric pressure tolerance of 86kPa to 106kPa suit industrial and embedded environments. The 24-pin ATX connector enables direct, plug-and-play connection to compatible motherboards.
At 300W continuous output, the module comfortably powers Mini computers, HTPCs, POS terminals, digital set-top boxes and network servers with modest power draw. It runs out of headroom when paired with discrete graphics cards or high-wattage CPUs that push total system demand above the rated limit. The package includes a 24-pin to 20-pin adapter cable, a DC input cable and an AUX cable for flexible installation. Weighing 189g, it adds minimal mass to portable or space-constrained deployments.
| Type | AT |
|---|
Use the 24Pin ATX connector for standard motherboards; add the 24Pin-to-20Pin adapter if your board has a 20-pin socket. Connect the DC input cable to a 12V source (11.4-12.6V, max 25A). The AUX cable supplies auxiliary power where required.
The module delivers up to 300W total from a 12V DC input at 85% efficiency. With 11.4-12.6V input and up to 25A draw, it powers Mini-ITX boards, POS terminals, HTPCs and similar low-profile systems within a 0-55°C operating range.
The AT-form-factor module uses a 24Pin ATX output connector and a DC barrel input. It supplies 300W combined across all rails, limited by the 12V DC input (11.4-12.6V, 25A max) and 85% conversion efficiency. No internal AC stage is present.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?