NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
myVolts
Compact 300 W AT module converts 12 V DC input to standard ATX power for Mini-ITX and 1U cases, with solid capacitors and full protection
This 12V DC-to-ATX power supply module delivers 300W of output power for Mini-ITX and 1U chassis. It accepts a 12V DC source between 11.4V and 12.6V and requires an external AC-DC adapter. Industrial solid capacitors provide stable operation from 0°C to 55°C with 85% efficiency. The board measures approximately 154mm by 35mm by 15mm, saving space in compact enclosures.
The module draws a maximum of 25A from the 12V DC input, so the accompanying adapter must supply at least that current. Over-current and short-circuit protections guard connected components against electrical faults. An operating humidity range of 45% to 75% and atmospheric pressure tolerance of 86kPa to 106kPa suit industrial and embedded environments. The 24-pin ATX connector enables direct, plug-and-play connection to compatible motherboards.
At 300W continuous output, the module comfortably powers Mini computers, HTPCs, POS terminals, digital set-top boxes and network servers with modest power draw. It runs out of headroom when paired with discrete graphics cards or high-wattage CPUs that push total system demand above the rated limit. The package includes a 24-pin to 20-pin adapter cable, a DC input cable and an AUX cable for flexible installation. Weighing 189g, it adds minimal mass to portable or space-constrained deployments.
| Type | AT |
|---|
Use the 24Pin ATX connector for standard motherboards; add the 24Pin-to-20Pin adapter if your board has a 20-pin socket. Connect the DC input cable to a 12V source (11.4-12.6V, max 25A). The AUX cable supplies auxiliary power where required.
The module delivers up to 300W total from a 12V DC input at 85% efficiency. With 11.4-12.6V input and up to 25A draw, it powers Mini-ITX boards, POS terminals, HTPCs and similar low-profile systems within a 0-55°C operating range.
The AT-form-factor module uses a 24Pin ATX output connector and a DC barrel input. It supplies 300W combined across all rails, limited by the 12V DC input (11.4-12.6V, 25A max) and 85% conversion efficiency. No internal AC stage is present.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?