NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
myVolts
Compact 300 W AT module converts 12 V DC input to standard ATX power for Mini-ITX and 1U cases, with solid capacitors and full protection
This 12V DC-to-ATX power supply module delivers 300W of output power for Mini-ITX and 1U chassis. It accepts a 12V DC source between 11.4V and 12.6V and requires an external AC-DC adapter. Industrial solid capacitors provide stable operation from 0°C to 55°C with 85% efficiency. The board measures approximately 154mm by 35mm by 15mm, saving space in compact enclosures.
The module draws a maximum of 25A from the 12V DC input, so the accompanying adapter must supply at least that current. Over-current and short-circuit protections guard connected components against electrical faults. An operating humidity range of 45% to 75% and atmospheric pressure tolerance of 86kPa to 106kPa suit industrial and embedded environments. The 24-pin ATX connector enables direct, plug-and-play connection to compatible motherboards.
At 300W continuous output, the module comfortably powers Mini computers, HTPCs, POS terminals, digital set-top boxes and network servers with modest power draw. It runs out of headroom when paired with discrete graphics cards or high-wattage CPUs that push total system demand above the rated limit. The package includes a 24-pin to 20-pin adapter cable, a DC input cable and an AUX cable for flexible installation. Weighing 189g, it adds minimal mass to portable or space-constrained deployments.
| Type | AT |
|---|
Use the 24Pin ATX connector for standard motherboards; add the 24Pin-to-20Pin adapter if your board has a 20-pin socket. Connect the DC input cable to a 12V source (11.4-12.6V, max 25A). The AUX cable supplies auxiliary power where required.
The module delivers up to 300W total from a 12V DC input at 85% efficiency. With 11.4-12.6V input and up to 25A draw, it powers Mini-ITX boards, POS terminals, HTPCs and similar low-profile systems within a 0-55°C operating range.
The AT-form-factor module uses a 24Pin ATX output connector and a DC barrel input. It supplies 300W combined across all rails, limited by the 12V DC input (11.4-12.6V, 25A max) and 85% conversion efficiency. No internal AC stage is present.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?