Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Pink aluminium enclosed switch-mode power supply, 24 V 20 A 480 W, screw terminals, fan cooled

myVolts

myVolts S-480-24 24V 20A 480W pink power supply

SKU CH-KDNW-CGD7D

A 24 V, 20 A, 480 W aluminium-alloy switch-mode supply with overload, over-voltage and short-circuit protection, CCC, FCC and CE compliance, and 0–40 °C operating range

  • TypeAT
  • High efficiency and low DC ripple for stable output
  • Operates at low temperatures extending service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

Aluminium alloy 24 V 20 A supply

This myVolts unit delivers a fixed 24 V DC output at up to 20 A for a total of 480 W. It accepts 110 V or 220 V AC with a ±15 % tolerance and is built from aluminium alloy for passive cooling.

Suits industrial and maker projects needing 24 V

It fits automation panels, LED displays, CCTV rigs, 3D printers and similar loads that demand steady 24 V power. Builders who require a different output voltage, higher current or active cooling should consider other models.

480 W continuous with overload and overvoltage guard

The supply handles full rated load continuously from 0 °C to 40 °C ambient and includes short-circuit, overload and overvoltage protection. It has no headroom beyond the 20 A limit, so sustained peaks above that rating will trip the protection.

Priekšrocības

  • High efficiency and low DC ripple for stable output
  • Operates at low temperatures extending service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

Specifikācijas

TypeAT

Jautājumi par šo preci

What AC mains connection must already be available for the S-480-24 to operate?

The unit requires a standard AC mains supply rated at 110 V or 220 V with a tolerance of ±15 % and provides L, N and ground terminals for the input wiring.

Can the S-480-24 share a 24 V DC bus with older equipment that draws less current?

Yes, the supply delivers up to 20 A at 24 V and includes overload, overvoltage and short-circuit protection, so it can power legacy loads alongside newer ones on the same bus.

How can I verify the S-480-24 is regulating correctly after wiring it?

Measure the DC output at the V+ and GND terminals; it should read 24 V and the ADJ terminal allows fine adjustment, while the unit has passed a 100 % full-load burn-in test at the factory.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.