Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Pink aluminium enclosed switch-mode power supply, 24 V 20 A 480 W, screw terminals, fan cooled

myVolts

myVolts S-480-24 24V 20A 480W pink power supply

SKU CH-KDNW-CGD7D

A 24 V, 20 A, 480 W aluminium-alloy switch-mode supply with overload, over-voltage and short-circuit protection, CCC, FCC and CE compliance, and 0–40 °C operating range

  • TypeAT
  • High efficiency and low DC ripple for stable output
  • Operates at low temperatures extending service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

Aluminium alloy 24 V 20 A supply

This myVolts unit delivers a fixed 24 V DC output at up to 20 A for a total of 480 W. It accepts 110 V or 220 V AC with a ±15 % tolerance and is built from aluminium alloy for passive cooling.

Suits industrial and maker projects needing 24 V

It fits automation panels, LED displays, CCTV rigs, 3D printers and similar loads that demand steady 24 V power. Builders who require a different output voltage, higher current or active cooling should consider other models.

480 W continuous with overload and overvoltage guard

The supply handles full rated load continuously from 0 °C to 40 °C ambient and includes short-circuit, overload and overvoltage protection. It has no headroom beyond the 20 A limit, so sustained peaks above that rating will trip the protection.

Poudarki

  • High efficiency and low DC ripple for stable output
  • Operates at low temperatures extending service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

Specifikacije

TypeAT

Vprašanja o tem izdelku

What AC mains connection must already be available for the S-480-24 to operate?

The unit requires a standard AC mains supply rated at 110 V or 220 V with a tolerance of ±15 % and provides L, N and ground terminals for the input wiring.

Can the S-480-24 share a 24 V DC bus with older equipment that draws less current?

Yes, the supply delivers up to 20 A at 24 V and includes overload, overvoltage and short-circuit protection, so it can power legacy loads alongside newer ones on the same bus.

How can I verify the S-480-24 is regulating correctly after wiring it?

Measure the DC output at the V+ and GND terminals; it should read 24 V and the ADJ terminal allows fine adjustment, while the unit has passed a 100 % full-load burn-in test at the factory.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.