Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Pink aluminium enclosed switch-mode power supply, 24 V 20 A 480 W, screw terminals, fan cooled

myVolts

myVolts S-480-24 24V 20A 480W pink power supply

SKU CH-KDNW-CGD7D

A 24 V, 20 A, 480 W aluminium-alloy switch-mode supply with overload, over-voltage and short-circuit protection, CCC, FCC and CE compliance, and 0–40 °C operating range

  • TypeAT
  • High efficiency and low DC ripple for stable output
  • Operates at low temperatures extending service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

Aluminium alloy 24 V 20 A supply

This myVolts unit delivers a fixed 24 V DC output at up to 20 A for a total of 480 W. It accepts 110 V or 220 V AC with a ±15 % tolerance and is built from aluminium alloy for passive cooling.

Suits industrial and maker projects needing 24 V

It fits automation panels, LED displays, CCTV rigs, 3D printers and similar loads that demand steady 24 V power. Builders who require a different output voltage, higher current or active cooling should consider other models.

480 W continuous with overload and overvoltage guard

The supply handles full rated load continuously from 0 °C to 40 °C ambient and includes short-circuit, overload and overvoltage protection. It has no headroom beyond the 20 A limit, so sustained peaks above that rating will trip the protection.

Kohokohdat

  • High efficiency and low DC ripple for stable output
  • Operates at low temperatures extending service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What AC mains connection must already be available for the S-480-24 to operate?

The unit requires a standard AC mains supply rated at 110 V or 220 V with a tolerance of ±15 % and provides L, N and ground terminals for the input wiring.

Can the S-480-24 share a 24 V DC bus with older equipment that draws less current?

Yes, the supply delivers up to 20 A at 24 V and includes overload, overvoltage and short-circuit protection, so it can power legacy loads alongside newer ones on the same bus.

How can I verify the S-480-24 is regulating correctly after wiring it?

Measure the DC output at the V+ and GND terminals; it should read 24 V and the ADJ terminal allows fine adjustment, while the unit has passed a 100 % full-load burn-in test at the factory.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.