Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC UDIMM memory upgrade

SKU CH-F7B2-W3VE8

128 GB kit of four 32 GB DDR5 ECC unbuffered UDIMMs at 5600 MT/s CL46 1.10 V for Supermicro X13SAW-F

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency for rated system performance
  • ECC error correction detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor matches the Supermicro X13SAW-F motherboard
  • 1 V operation at 2Rx8 rank meets the board's memory controller requirements

Exact-match DDR5 ECC kit

This 128 GB kit delivers four 32 GB DDR5 5600 modules built to the 288-pin UDIMM form factor. Each stick runs at 1.1 V with CL46 timing and 2Rx8 organisation. The ECC function corrects single-bit errors on the fly, protecting data integrity in critical workloads.

Fits Supermicro X13SAW-F motherboard

The unbuffered ECC UDIMM layout matches the board's memory-controller requirements exactly, so the full 128 GB is recognised at rated speed. No heat spreaders are fitted, leaving clearance for dense CPU-cooler arrangements. Populate all four slots following the manual's population order for proper operation.

For ECC-dependent workstations

Suits builders upgrading a Supermicro X13SAW-F platform that demands DDR5 5600 ECC UDIMM memory with these precise ranks and timings. Not for systems that require registered DIMMs, non-ECC modules, SODIMM form factors or any DDR generation other than DDR5.

Priekšrocības

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency for rated system performance
  • ECC error correction detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor matches the Supermicro X13SAW-F motherboard
  • 1 V operation at 2Rx8 rank meets the board's memory controller requirements

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How does the 1.10V operating voltage affect heat output during continuous operation?

The 1.10V DDR5 standard voltage keeps power draw and heat low during all-day workloads, and the modules have no heat spreader, so case airflow handles cooling.

Does my Supermicro X13SAW-F motherboard need a specific BIOS version or CPU to recognise all 128GB?

The kit is validated for the Supermicro X13SAW-F at DDR5-5600; consult your motherboard manual for supported capacities, approved DIMM population order, and any required BIOS update before installing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.