Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC UDIMM memory upgrade

SKU CH-F7B2-W3VE8

128 GB kit of four 32 GB DDR5 ECC unbuffered UDIMMs at 5600 MT/s CL46 1.10 V for Supermicro X13SAW-F

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency for rated system performance
  • ECC error correction detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor matches the Supermicro X13SAW-F motherboard
  • 1 V operation at 2Rx8 rank meets the board's memory controller requirements

Exact-match DDR5 ECC kit

This 128 GB kit delivers four 32 GB DDR5 5600 modules built to the 288-pin UDIMM form factor. Each stick runs at 1.1 V with CL46 timing and 2Rx8 organisation. The ECC function corrects single-bit errors on the fly, protecting data integrity in critical workloads.

Fits Supermicro X13SAW-F motherboard

The unbuffered ECC UDIMM layout matches the board's memory-controller requirements exactly, so the full 128 GB is recognised at rated speed. No heat spreaders are fitted, leaving clearance for dense CPU-cooler arrangements. Populate all four slots following the manual's population order for proper operation.

For ECC-dependent workstations

Suits builders upgrading a Supermicro X13SAW-F platform that demands DDR5 5600 ECC UDIMM memory with these precise ranks and timings. Not for systems that require registered DIMMs, non-ECC modules, SODIMM form factors or any DDR generation other than DDR5.

Puncte forte

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency for rated system performance
  • ECC error correction detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor matches the Supermicro X13SAW-F motherboard
  • 1 V operation at 2Rx8 rank meets the board's memory controller requirements

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How does the 1.10V operating voltage affect heat output during continuous operation?

The 1.10V DDR5 standard voltage keeps power draw and heat low during all-day workloads, and the modules have no heat spreader, so case airflow handles cooling.

Does my Supermicro X13SAW-F motherboard need a specific BIOS version or CPU to recognise all 128GB?

The kit is validated for the Supermicro X13SAW-F at DDR5-5600; consult your motherboard manual for supported capacities, approved DIMM population order, and any required BIOS update before installing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.