저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC UDIMM memory upgrade

SKU CH-F7B2-W3VE8

128 GB kit of four 32 GB DDR5 ECC unbuffered UDIMMs at 5600 MT/s CL46 1.10 V for Supermicro X13SAW-F

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency for rated system performance
  • ECC error correction detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor matches the Supermicro X13SAW-F motherboard
  • 1 V operation at 2Rx8 rank meets the board's memory controller requirements

Exact-match DDR5 ECC kit

This 128 GB kit delivers four 32 GB DDR5 5600 modules built to the 288-pin UDIMM form factor. Each stick runs at 1.1 V with CL46 timing and 2Rx8 organisation. The ECC function corrects single-bit errors on the fly, protecting data integrity in critical workloads.

Fits Supermicro X13SAW-F motherboard

The unbuffered ECC UDIMM layout matches the board's memory-controller requirements exactly, so the full 128 GB is recognised at rated speed. No heat spreaders are fitted, leaving clearance for dense CPU-cooler arrangements. Populate all four slots following the manual's population order for proper operation.

For ECC-dependent workstations

Suits builders upgrading a Supermicro X13SAW-F platform that demands DDR5 5600 ECC UDIMM memory with these precise ranks and timings. Not for systems that require registered DIMMs, non-ECC modules, SODIMM form factors or any DDR generation other than DDR5.

주요 특징

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency for rated system performance
  • ECC error correction detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor matches the Supermicro X13SAW-F motherboard
  • 1 V operation at 2Rx8 rank meets the board's memory controller requirements

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How does the 1.10V operating voltage affect heat output during continuous operation?

The 1.10V DDR5 standard voltage keeps power draw and heat low during all-day workloads, and the modules have no heat spreader, so case airflow handles cooling.

Does my Supermicro X13SAW-F motherboard need a specific BIOS version or CPU to recognise all 128GB?

The kit is validated for the Supermicro X13SAW-F at DDR5-5600; consult your motherboard manual for supported capacities, approved DIMM population order, and any required BIOS update before installing.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.