BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277053BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB DDR4 2133 CL15 260-PIN SODIMM POSIFLEX RT-5015 memory upgrade
16GB DDR4 2133 CL15 SODIMM memory upgrade for POSIFLEX RT-5015 terminals
- Capacity16GB
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity expands terminal multitasking headroom
- DDR4 2133 speed matches POSIFLEX RT-5015 spec
- CL15 latency keeps response tight under load
- 2 V operation reduces power draw and heat
- 260-pin SODIMM fits the terminal slot directly
POSIFLEX RT-5015 memory upgrade
This 16 GB DDR4 SODIMM is built for the POSIFLEX RT-5015 terminal. It targets IT teams and integrators who need a single-module capacity increase for point-of-sale or kiosk workloads. The 260-pin form factor matches the system slot exactly.
Thermals, noise and power
Operating at 1.20 V without a heat spreader, the module adds minimal thermal load to the compact chassis. Unbuffered, non-ECC silicon draws only the power required for the 2133 MT/s data rate. Passive cooling in the terminal is sufficient for continuous operation.
Deciding specification
The 2Rx8 rank organisation at CL15 latency is the detail that confirms compatibility with the RT-5015 memory controller. A different rank or timing will prevent the terminal from posting. Verify this exact configuration before ordering.
Priekšrocības
- 16 GB capacity expands terminal multitasking headroom
- DDR4 2133 speed matches POSIFLEX RT-5015 spec
- CL15 latency keeps response tight under load
- 2 V operation reduces power draw and heat
- 260-pin SODIMM fits the terminal slot directly
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM |
Jautājumi par šo preci
How do I install this 260-pin DDR4 SODIMM into the POSIFLEX RT-5015, and what step is often missed?
Power off the terminal and disconnect the power cord. Open the memory compartment, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click into place. The step often missed is verifying both clips have fully engaged.
What maintenance or replacement will this 16GB 1.20V module need over time?
No routine maintenance is required for this non-ECC unbuffered SODIMM. If a memory error appears later, the module would need replacement; otherwise it runs for the life of the terminal.
What limit appears first when this CL15 2133MHz memory runs under sustained load in the RT-5015?
The CAS latency of CL15 at 2133MHz sets the access timing ceiling. Under sustained workloads the memory controller reaches this latency bound before bandwidth or voltage limits become a factor.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
