Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-BNPK-KKSEJ

16 GB DDR5-4800 ECC registered RDIMM validated for Supermicro H14DSG-O-CPU servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

Skatīt vēl 30 konfigurācijas
  • Exact-match 16 GB DDR5-4800 CL40 1Rx8 ECC RDIMM installs at rated speed
  • Verified fitment for Supermicro H14DSG-O-CPU 288-pin registered DIMM slots
  • Registered architecture offloads the controller so every slot runs fully populated
  • ECC corrects single-bit errors on the fly to stop silent data corruption
  • Lifetime replacement warranty with free US-based technical support included

Exact DDR5-4800 RDIMM for Supermicro H14DSG-O-CPU

This 16GB registered ECC module matches the precise rank, voltage and timing the Supermicro H14DSG-O-CPU memory controller expects. It installs as a direct drop-in upgrade so the system recognises the full capacity at its rated speed. Built for servers and workstations that require validated memory population.

288-pin registered form factor with ECC

The 288-pin RDIMM layout fits only motherboards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots. Registered buffering offloads the memory controller to allow every slot to run fully populated, while on-die ECC corrects single-bit errors before they reach production workloads. No heat spreader is fitted, so airflow across the PCB is unrestricted.

DDR5 4800 CL40 1.1V limits

The JEDEC DDR5-4800 standard caps this module at 4800 MT/s with CL40 latency at 1.1V; higher speeds or tighter timings need a motherboard and CPU combination that officially supports them. Population rules differ by platform, so the system manual must be consulted for approved DIMM order and maximum capacity per channel. Mixing ranks or voltages can prevent the server from posting.

Priekšrocības

  • Exact-match 16 GB DDR5-4800 CL40 1Rx8 ECC RDIMM installs at rated speed
  • Verified fitment for Supermicro H14DSG-O-CPU 288-pin registered DIMM slots
  • Registered architecture offloads the controller so every slot runs fully populated
  • ECC corrects single-bit errors on the fly to stop silent data corruption
  • Lifetime replacement warranty with free US-based technical support included

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does PC5-38400 set the real-world speed ceiling for this DDR5 module?

The module is rated DDR5 4800, which is the maximum JEDEC speed this memory controller will negotiate; PC5-38400 is the matching peak-bandwidth label.

Will this 288-pin RDIMM seat in the Supermicro H14DSG-O-CPU DIMM slots?

Yes, the board requires 288-pin registered DIMMs and this module matches that exact form factor, so it fits the slots without adapters.

What is the correct population order when installing this 1Rx8 ECC RDIMM?

Consult the Supermicro H14DSG-O-CPU manual for the approved DIMM population sequence; the board's memory rules dictate which slots must be filled first.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.