Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-BNPK-KKSEJ

16 GB DDR5-4800 ECC registered RDIMM validated for Supermicro H14DSG-O-CPU servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

Näytä 30 muuta kokoonpanoa
  • Exact-match 16 GB DDR5-4800 CL40 1Rx8 ECC RDIMM installs at rated speed
  • Verified fitment for Supermicro H14DSG-O-CPU 288-pin registered DIMM slots
  • Registered architecture offloads the controller so every slot runs fully populated
  • ECC corrects single-bit errors on the fly to stop silent data corruption
  • Lifetime replacement warranty with free US-based technical support included

Exact DDR5-4800 RDIMM for Supermicro H14DSG-O-CPU

This 16GB registered ECC module matches the precise rank, voltage and timing the Supermicro H14DSG-O-CPU memory controller expects. It installs as a direct drop-in upgrade so the system recognises the full capacity at its rated speed. Built for servers and workstations that require validated memory population.

288-pin registered form factor with ECC

The 288-pin RDIMM layout fits only motherboards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots. Registered buffering offloads the memory controller to allow every slot to run fully populated, while on-die ECC corrects single-bit errors before they reach production workloads. No heat spreader is fitted, so airflow across the PCB is unrestricted.

DDR5 4800 CL40 1.1V limits

The JEDEC DDR5-4800 standard caps this module at 4800 MT/s with CL40 latency at 1.1V; higher speeds or tighter timings need a motherboard and CPU combination that officially supports them. Population rules differ by platform, so the system manual must be consulted for approved DIMM order and maximum capacity per channel. Mixing ranks or voltages can prevent the server from posting.

Kohokohdat

  • Exact-match 16 GB DDR5-4800 CL40 1Rx8 ECC RDIMM installs at rated speed
  • Verified fitment for Supermicro H14DSG-O-CPU 288-pin registered DIMM slots
  • Registered architecture offloads the controller so every slot runs fully populated
  • ECC corrects single-bit errors on the fly to stop silent data corruption
  • Lifetime replacement warranty with free US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does PC5-38400 set the real-world speed ceiling for this DDR5 module?

The module is rated DDR5 4800, which is the maximum JEDEC speed this memory controller will negotiate; PC5-38400 is the matching peak-bandwidth label.

Will this 288-pin RDIMM seat in the Supermicro H14DSG-O-CPU DIMM slots?

Yes, the board requires 288-pin registered DIMMs and this module matches that exact form factor, so it fits the slots without adapters.

What is the correct population order when installing this 1Rx8 ECC RDIMM?

Consult the Supermicro H14DSG-O-CPU manual for the approved DIMM population sequence; the board's memory rules dictate which slots must be filled first.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.