BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280875BTC
Krājumā
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 SODIMM POSIFLEX RT-6016Q-G2 memory upgrade
A 32 GB DDR4 SODIMM kit with two 16 GB modules rated at 3200 MT/s CL22 for POSIFLEX RT-6016Q-G2 terminals
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit doubles capacity for POS terminals
- 3200 MT/s DDR4 speed matches system spec
- CL22 latency keeps timing stable under load
- 20 V low voltage reduces heat in slim chassis
- 260-pin SODIMM form factor fits POSIFLEX RT-6016Q-G2 exactly
POSIFLEX RT-6016Q-G2 SODIMM kit
This 32 GB kit contains two 16 GB DDR4 SODIMM modules built for the POSIFLEX RT-6016Q-G2 terminal. It uses unbuffered non-ECC memory running at 3200 MT/s with a CAS latency of 22. The 260-pin form factor matches the system's SO-DIMM slots.
DDR4 3200 speed and voltage limits
The modules operate at the DDR4 3200 (PC4-25600) data rate and require 1.20 V. Systems that only support lower DDR4 speeds will clock the kit down automatically. Platforms needing ECC or registered DIMMs cannot use this unbuffered non-ECC kit.
Dual-rank 2Rx8 organisation decides fit
Each 16 GB module uses a 2Rx8 rank structure. Some OEM terminals only accept single-rank SODIMMs, so the dual-rank layout may prevent the system from recognising the full 32 GB capacity. Check the service manual for rank limits before ordering.
Priekšrocības
- 32 GB kit doubles capacity for POS terminals
- 3200 MT/s DDR4 speed matches system spec
- CL22 latency keeps timing stable under load
- 20 V low voltage reduces heat in slim chassis
- 260-pin SODIMM form factor fits POSIFLEX RT-6016Q-G2 exactly
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
Jautājumi par šo preci
Should I pick the 2 x 16 GB kit or a single 32 GB module for my POSIFLEX RT-6016Q-G2?
The kit contains two 16 GB SODIMMs, giving 32 GB total in dual-channel mode. A single 32 GB module would run in single-channel and halve memory bandwidth.
What does the 3200 MHz rating deliver once the modules are installed in the terminal?
The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, providing the rated throughput when the platform supports that speed.
Does the 260-pin SODIMM interface limit the upgrade in any way?
The 260-pin DDR4 SODIMM form factor is the only memory slot type the terminal accepts, so the kit fits directly without adapters.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
