Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green SODIMM modules, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 SODIMM POSIFLEX RT-6016Q-G2 memory upgrade

SKU CH-M2DZ-T1N0G

A 32 GB DDR4 SODIMM kit with two 16 GB modules rated at 3200 MT/s CL22 for POSIFLEX RT-6016Q-G2 terminals

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit doubles capacity for POS terminals
  • 3200 MT/s DDR4 speed matches system spec
  • CL22 latency keeps timing stable under load
  • 20 V low voltage reduces heat in slim chassis
  • 260-pin SODIMM form factor fits POSIFLEX RT-6016Q-G2 exactly

POSIFLEX RT-6016Q-G2 SODIMM kit

This 32 GB kit contains two 16 GB DDR4 SODIMM modules built for the POSIFLEX RT-6016Q-G2 terminal. It uses unbuffered non-ECC memory running at 3200 MT/s with a CAS latency of 22. The 260-pin form factor matches the system's SO-DIMM slots.

DDR4 3200 speed and voltage limits

The modules operate at the DDR4 3200 (PC4-25600) data rate and require 1.20 V. Systems that only support lower DDR4 speeds will clock the kit down automatically. Platforms needing ECC or registered DIMMs cannot use this unbuffered non-ECC kit.

Dual-rank 2Rx8 organisation decides fit

Each 16 GB module uses a 2Rx8 rank structure. Some OEM terminals only accept single-rank SODIMMs, so the dual-rank layout may prevent the system from recognising the full 32 GB capacity. Check the service manual for rank limits before ordering.

Points forts

  • 32 GB kit doubles capacity for POS terminals
  • 3200 MT/s DDR4 speed matches system spec
  • CL22 latency keeps timing stable under load
  • 20 V low voltage reduces heat in slim chassis
  • 260-pin SODIMM form factor fits POSIFLEX RT-6016Q-G2 exactly

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions sur cet article

Should I pick the 2 x 16 GB kit or a single 32 GB module for my POSIFLEX RT-6016Q-G2?

The kit contains two 16 GB SODIMMs, giving 32 GB total in dual-channel mode. A single 32 GB module would run in single-channel and halve memory bandwidth.

What does the 3200 MHz rating deliver once the modules are installed in the terminal?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, providing the rated throughput when the platform supports that speed.

Does the 260-pin SODIMM interface limit the upgrade in any way?

The 260-pin DDR4 SODIMM form factor is the only memory slot type the terminal accepts, so the kit fits directly without adapters.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.