BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277285BTC
Skladem
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 SODIMM POSIFLEX RT-6016Q-G2 memory upgrade
A 32 GB DDR4 SODIMM kit with two 16 GB modules rated at 3200 MT/s CL22 for POSIFLEX RT-6016Q-G2 terminals
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit doubles capacity for POS terminals
- 3200 MT/s DDR4 speed matches system spec
- CL22 latency keeps timing stable under load
- 20 V low voltage reduces heat in slim chassis
- 260-pin SODIMM form factor fits POSIFLEX RT-6016Q-G2 exactly
POSIFLEX RT-6016Q-G2 SODIMM kit
This 32 GB kit contains two 16 GB DDR4 SODIMM modules built for the POSIFLEX RT-6016Q-G2 terminal. It uses unbuffered non-ECC memory running at 3200 MT/s with a CAS latency of 22. The 260-pin form factor matches the system's SO-DIMM slots.
DDR4 3200 speed and voltage limits
The modules operate at the DDR4 3200 (PC4-25600) data rate and require 1.20 V. Systems that only support lower DDR4 speeds will clock the kit down automatically. Platforms needing ECC or registered DIMMs cannot use this unbuffered non-ECC kit.
Dual-rank 2Rx8 organisation decides fit
Each 16 GB module uses a 2Rx8 rank structure. Some OEM terminals only accept single-rank SODIMMs, so the dual-rank layout may prevent the system from recognising the full 32 GB capacity. Check the service manual for rank limits before ordering.
Přednosti
- 32 GB kit doubles capacity for POS terminals
- 3200 MT/s DDR4 speed matches system spec
- CL22 latency keeps timing stable under load
- 20 V low voltage reduces heat in slim chassis
- 260-pin SODIMM form factor fits POSIFLEX RT-6016Q-G2 exactly
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
Should I pick the 2 x 16 GB kit or a single 32 GB module for my POSIFLEX RT-6016Q-G2?
The kit contains two 16 GB SODIMMs, giving 32 GB total in dual-channel mode. A single 32 GB module would run in single-channel and halve memory bandwidth.
What does the 3200 MHz rating deliver once the modules are installed in the terminal?
The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, providing the rated throughput when the platform supports that speed.
Does the 260-pin SODIMM interface limit the upgrade in any way?
The 260-pin DDR4 SODIMM form factor is the only memory slot type the terminal accepts, so the kit fits directly without adapters.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
