Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5200 CL38 SuperMicro Compatible memory upgrade

SKU CH-QBZV-FXJHB

A 32 GB dual-channel DDR5 kit with two 16 GB modules running at 5200 MT/s and CL38 latency for compatible SuperMicro systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB kit in two 16 GB modules for easy dual-channel expansion
  • DDR5 5200 speed rated at PC5-41600 for fast data throughput
  • CL38 CAS latency tuned for responsive system performance
  • 10 V operating voltage reduces power draw and heat
  • Validated for SuperMicro C9Z790-CGW workstation motherboards

SuperMicro Compatible DDR5 Kit

This 32GB kit contains two 16GB DDR5 UDIMMs rated at 5200MT/s with CL38 latency. Modules are unbuffered non-ECC and validated for SuperMicro desktop and SuperWorkstation platforms including the MBD-C9Z790-CGW motherboard. Each stick runs at 1.10V using major OEM DRAM chips.

Builders who need validated SuperMicro memory

Suitable for integrators and enthusiasts upgrading or populating SuperMicro workstation boards that require DDR5 5200 unbuffered UDIMMs. Not for servers requiring registered ECC modules or systems limited to lower DDR5 speeds. Buyers needing heat spreaders or higher-capacity single modules should look elsewhere.

CL38 latency at 5200MT/s

The CAS latency of CL38 at the rated 5200MT/s speed is the primary timing figure that determines compatibility with the target SuperMicro platforms. Systems configured for different latency tables may not train these modules at the advertised frequency.

Priekšrocības

  • 32 GB kit in two 16 GB modules for easy dual-channel expansion
  • DDR5 5200 speed rated at PC5-41600 for fast data throughput
  • CL38 CAS latency tuned for responsive system performance
  • 10 V operating voltage reduces power draw and heat
  • Validated for SuperMicro C9Z790-CGW workstation motherboards

Specifikācijas

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the 288-pin DDR5 UDIMM fit a standard desktop DIMM slot?

Yes, the 288-pin DDR5 UDIMM form factor matches standard desktop DDR5 slots on compatible Supermicro motherboards.

What BIOS setting should I check after installing the CL38 modules?

Enable the DDR5 5200 XMP or EXPO profile in BIOS so the kit runs at its rated 5200 MT/s instead of the default JEDEC speed.

Will the 1Rx8 rank configuration limit future capacity upgrades?

The 1Rx8 single-rank sticks leave additional DIMM slots free for adding more 1Rx8 or 2Rx8 modules up to the board's maximum supported capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.