Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 5200 CL38 1.10V 288-Pin UDIMM SuperMicro MBD-C9Z790-CG memory upgrade

SKU CH-NG94-2ZZYT

A 32 GB DDR5 module running at 5200 MT/s with CL38 latency for Supermicro MBD-C9Z790-CG workstations

  • Capacity32GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • 32 GB capacity expands workstation memory for demanding workloads
  • DDR5 5200 speed delivers high bandwidth for data-intensive tasks
  • CL38 latency provides responsive timing for system stability
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro MBD-C9Z790-CG ensures plug-and-play compatibility

Capacity and compatibility

This 32 GB DDR5 module is built for the SuperMicro MBD-C9Z790-CG motherboard. It targets system integrators and IT professionals who need validated memory for that specific platform.

Speed and latency limits

The kit runs at 5200 MT/s with a CAS latency of 38. The SPD profile also lists a CL44 timing at the same data rate, so the board will train to the looser figure unless the BIOS is adjusted manually.

Unbuffered layout and daily handling

The stick uses a 2Rx8 organisation on a standard 288-pin UDIMM PCB without a heat spreader. That keeps the profile low for tight workstation chassis, but the exposed DRAM requires careful handling during installation.

Priekšrocības

  • 32 GB capacity expands workstation memory for demanding workloads
  • DDR5 5200 speed delivers high bandwidth for data-intensive tasks
  • CL38 latency provides responsive timing for system stability
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro MBD-C9Z790-CG ensures plug-and-play compatibility

Specifikācijas

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K1
Capacity32GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Should I pick the single 32 GB module or look for a two-stick kit for my SuperMicro MBD-C9Z790-CG?

The listing is a single 32 GB UDIMM (1×32 GB); adding a second identical module later will enable dual-channel bandwidth on the board.

The spec shows both CL38 and CL44 — which latency will I actually see at 5200 MT/s?

The module is rated CL38 at DDR5-5200; CL44 appears in the supplier title but the datasheet specifies CL38 for this part.

Does the 288-pin DDR5 interface limit the 5200 MT/s transfer rate in any way?

The 288-pin DDR5 UDIMM form factor carries the full 5200 MT/s (PC5-41600) signal without downshifting.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.