Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 5200 CL38 1.10V 288-Pin UDIMM SuperMicro MBD-C9Z790-CG memory upgrade

SKU CH-NG94-2ZZYT

A 32 GB DDR5 module running at 5200 MT/s with CL38 latency for Supermicro MBD-C9Z790-CG workstations

  • Capacity32GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • 32 GB capacity expands workstation memory for demanding workloads
  • DDR5 5200 speed delivers high bandwidth for data-intensive tasks
  • CL38 latency provides responsive timing for system stability
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro MBD-C9Z790-CG ensures plug-and-play compatibility

Capacity and compatibility

This 32 GB DDR5 module is built for the SuperMicro MBD-C9Z790-CG motherboard. It targets system integrators and IT professionals who need validated memory for that specific platform.

Speed and latency limits

The kit runs at 5200 MT/s with a CAS latency of 38. The SPD profile also lists a CL44 timing at the same data rate, so the board will train to the looser figure unless the BIOS is adjusted manually.

Unbuffered layout and daily handling

The stick uses a 2Rx8 organisation on a standard 288-pin UDIMM PCB without a heat spreader. That keeps the profile low for tight workstation chassis, but the exposed DRAM requires careful handling during installation.

Istaknuto

  • 32 GB capacity expands workstation memory for demanding workloads
  • DDR5 5200 speed delivers high bandwidth for data-intensive tasks
  • CL38 latency provides responsive timing for system stability
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro MBD-C9Z790-CG ensures plug-and-play compatibility

Specifikacije

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K1
Capacity32GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Should I pick the single 32 GB module or look for a two-stick kit for my SuperMicro MBD-C9Z790-CG?

The listing is a single 32 GB UDIMM (1×32 GB); adding a second identical module later will enable dual-channel bandwidth on the board.

The spec shows both CL38 and CL44 — which latency will I actually see at 5200 MT/s?

The module is rated CL38 at DDR5-5200; CL44 appears in the supplier title but the datasheet specifies CL38 for this part.

Does the 288-pin DDR5 interface limit the 5200 MT/s transfer rate in any way?

The 288-pin DDR5 UDIMM form factor carries the full 5200 MT/s (PC5-41600) signal without downshifting.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.