We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 5200 CL38 1.10V 288-Pin UDIMM SuperMicro MBD-C9Z790-CG memory upgrade

SKU CH-NG94-2ZZYT

A 32 GB DDR5 module running at 5200 MT/s with CL38 latency for Supermicro MBD-C9Z790-CG workstations

  • Capacity32GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • 32 GB capacity expands workstation memory for demanding workloads
  • DDR5 5200 speed delivers high bandwidth for data-intensive tasks
  • CL38 latency provides responsive timing for system stability
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro MBD-C9Z790-CG ensures plug-and-play compatibility

Capacity and compatibility

This 32 GB DDR5 module is built for the SuperMicro MBD-C9Z790-CG motherboard. It targets system integrators and IT professionals who need validated memory for that specific platform.

Speed and latency limits

The kit runs at 5200 MT/s with a CAS latency of 38. The SPD profile also lists a CL44 timing at the same data rate, so the board will train to the looser figure unless the BIOS is adjusted manually.

Unbuffered layout and daily handling

The stick uses a 2Rx8 organisation on a standard 288-pin UDIMM PCB without a heat spreader. That keeps the profile low for tight workstation chassis, but the exposed DRAM requires careful handling during installation.

Highlights

  • 32 GB capacity expands workstation memory for demanding workloads
  • DDR5 5200 speed delivers high bandwidth for data-intensive tasks
  • CL38 latency provides responsive timing for system stability
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro MBD-C9Z790-CG ensures plug-and-play compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K1
Capacity32GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the single 32 GB module or look for a two-stick kit for my SuperMicro MBD-C9Z790-CG?

The listing is a single 32 GB UDIMM (1×32 GB); adding a second identical module later will enable dual-channel bandwidth on the board.

The spec shows both CL38 and CL44 — which latency will I actually see at 5200 MT/s?

The module is rated CL38 at DDR5-5200; CL44 appears in the supplier title but the datasheet specifies CL38 for this part.

Does the 288-pin DDR5 interface limit the 5200 MT/s transfer rate in any way?

The 288-pin DDR5 UDIMM form factor carries the full 5200 MT/s (PC5-41600) signal without downshifting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.