Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR5 UDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4×8GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Supermicro X13SAW-TLN4F

SKU CH-ZBRC-XFMB3

A 32 GB DDR5 kit (four 8 GB UDIMMs) rated at 5600 MT/s, CL46, 1.1 V, built with major OEM chips and validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • Exact-match 32GB DDR5-5600 kit runs at rated speed
  • Verified fit for Supermicro X13SAW-TLN4F motherboard
  • Major OEM chips tested for stability at CL46 1.1V
  • 4×8GB 1Rx8 unbuffered UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Exact DDR5 5600 kit for Supermicro X13SAW-TLN4F

This 32 GB kit contains four 8 GB UDIMM modules built to the DDR5 5600 standard. It is intended for owners of the Supermicro X13SAW-TLN4F motherboard who need a direct, non-ECC memory upgrade that matches the board's native speed and pin layout.

Sustained operation at rated 5600 speed

The modules run at 1.1 V with a 1Rx8 organisation using major OEM chips. Under continuous workloads they maintain the specified DDR5 5600 transfer rate and CL46 timing without requiring voltage increases or manual timing adjustments.

288-pin UDIMM form factor

This single physical and electrical specification determines fitment. The kit will only work in systems that accept 288-pin DDR5 UDIMM modules without ECC or registered buffering.

Priekšrocības

  • Exact-match 32GB DDR5-5600 kit runs at rated speed
  • Verified fit for Supermicro X13SAW-TLN4F motherboard
  • Major OEM chips tested for stability at CL46 1.1V
  • 4×8GB 1Rx8 unbuffered UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much power do the 1.1V DDR5 5600 modules draw when the Supermicro X13SAW-TLN4F runs all day?

Each 8 GB stick operates at 1.10 V, the standard DDR5 voltage, so total draw stays low even with four modules populated continuously.

What must the motherboard provide for this 4×8 GB kit to be recognised at full capacity?

The board needs four free 288-pin DDR5 UDIMM slots that support non-ECC unbuffered 1Rx8 modules at PC5-44800 speed.

Will the CL46 timing work alongside older DDR5 sticks I already have installed?

Mixing kits forces the memory controller to run all modules at the slowest common timing; identical CL46 1Rx8 sticks give the best stability.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.