Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR5 UDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4×8GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Supermicro X13SAW-TLN4F

SKU CH-ZBRC-XFMB3

A 32 GB DDR5 kit (four 8 GB UDIMMs) rated at 5600 MT/s, CL46, 1.1 V, built with major OEM chips and validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • Exact-match 32GB DDR5-5600 kit runs at rated speed
  • Verified fit for Supermicro X13SAW-TLN4F motherboard
  • Major OEM chips tested for stability at CL46 1.1V
  • 4×8GB 1Rx8 unbuffered UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Exact DDR5 5600 kit for Supermicro X13SAW-TLN4F

This 32 GB kit contains four 8 GB UDIMM modules built to the DDR5 5600 standard. It is intended for owners of the Supermicro X13SAW-TLN4F motherboard who need a direct, non-ECC memory upgrade that matches the board's native speed and pin layout.

Sustained operation at rated 5600 speed

The modules run at 1.1 V with a 1Rx8 organisation using major OEM chips. Under continuous workloads they maintain the specified DDR5 5600 transfer rate and CL46 timing without requiring voltage increases or manual timing adjustments.

288-pin UDIMM form factor

This single physical and electrical specification determines fitment. The kit will only work in systems that accept 288-pin DDR5 UDIMM modules without ECC or registered buffering.

Pluspunten

  • Exact-match 32GB DDR5-5600 kit runs at rated speed
  • Verified fit for Supermicro X13SAW-TLN4F motherboard
  • Major OEM chips tested for stability at CL46 1.1V
  • 4×8GB 1Rx8 unbuffered UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How much power do the 1.1V DDR5 5600 modules draw when the Supermicro X13SAW-TLN4F runs all day?

Each 8 GB stick operates at 1.10 V, the standard DDR5 voltage, so total draw stays low even with four modules populated continuously.

What must the motherboard provide for this 4×8 GB kit to be recognised at full capacity?

The board needs four free 288-pin DDR5 UDIMM slots that support non-ECC unbuffered 1Rx8 modules at PC5-44800 speed.

Will the CL46 timing work alongside older DDR5 sticks I already have installed?

Mixing kits forces the memory controller to run all modules at the slowest common timing; identical CL46 1Rx8 sticks give the best stability.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.