Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green DDR5 UDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4×8GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Supermicro X13SAW-TLN4F

SKU CH-ZBRC-XFMB3

A 32 GB DDR5 kit (four 8 GB UDIMMs) rated at 5600 MT/s, CL46, 1.1 V, built with major OEM chips and validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • Exact-match 32GB DDR5-5600 kit runs at rated speed
  • Verified fit for Supermicro X13SAW-TLN4F motherboard
  • Major OEM chips tested for stability at CL46 1.1V
  • 4×8GB 1Rx8 unbuffered UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Exact DDR5 5600 kit for Supermicro X13SAW-TLN4F

This 32 GB kit contains four 8 GB UDIMM modules built to the DDR5 5600 standard. It is intended for owners of the Supermicro X13SAW-TLN4F motherboard who need a direct, non-ECC memory upgrade that matches the board's native speed and pin layout.

Sustained operation at rated 5600 speed

The modules run at 1.1 V with a 1Rx8 organisation using major OEM chips. Under continuous workloads they maintain the specified DDR5 5600 transfer rate and CL46 timing without requiring voltage increases or manual timing adjustments.

288-pin UDIMM form factor

This single physical and electrical specification determines fitment. The kit will only work in systems that accept 288-pin DDR5 UDIMM modules without ECC or registered buffering.

Prednosti

  • Exact-match 32GB DDR5-5600 kit runs at rated speed
  • Verified fit for Supermicro X13SAW-TLN4F motherboard
  • Major OEM chips tested for stability at CL46 1.1V
  • 4×8GB 1Rx8 unbuffered UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How much power do the 1.1V DDR5 5600 modules draw when the Supermicro X13SAW-TLN4F runs all day?

Each 8 GB stick operates at 1.10 V, the standard DDR5 voltage, so total draw stays low even with four modules populated continuously.

What must the motherboard provide for this 4×8 GB kit to be recognised at full capacity?

The board needs four free 288-pin DDR5 UDIMM slots that support non-ECC unbuffered 1Rx8 modules at PC5-44800 speed.

Will the CL46 timing work alongside older DDR5 sticks I already have installed?

Mixing kits forces the memory controller to run all modules at the slowest common timing; identical CL46 1Rx8 sticks give the best stability.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.