BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278589BTC
Krājumā
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3415 memory upgrade
A 4GB DDR3 SODIMM module running at 1333MHz with CL9 latency for the POSIFLEX PS-3415 terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3415 terminal
- DDR3 1333 speed for responsive operation
- Low 1.35V voltage reduces power draw
- 4GB capacity handles daily POS workloads
- 204-pin SODIMM fits the memory slot
POS Terminal Memory Upgrade
This 4 GB DDR3 SODIMM is built specifically for the POSIFLEX PS-3415 fanless touch-screen terminal. It uses a 204-pin unbuffered non-ECC layout running at 1333 MHz with CL9 latency. The module draws 1.35 V and is tested for stable operation in point-of-sale workloads.
Thermals and Power in Service
Low-voltage 1.35 V operation keeps heat output minimal inside the sealed fanless chassis. No heat spreader is fitted, relying on the terminal's passive cooling design. Power draw stays within the platform's original memory budget, so the upgrade does not increase acoustic or thermal load.
When the Upgrade Makes Sense
Replacing a smaller 2 GB stick or adding a second module doubles the memory available to the POS application and operating system. The jump is worth it when the terminal runs multiple peripherals or newer software that exceeds the original capacity. Builders needing ECC or registered memory should look elsewhere.
Priekšrocības
- Designed for POSIFLEX PS-3415 terminal
- DDR3 1333 speed for responsive operation
- Low 1.35V voltage reduces power draw
- 4GB capacity handles daily POS workloads
- 204-pin SODIMM fits the memory slot
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Jautājumi par šo preci
How do I install this 204-pin SODIMM into the POSIFLEX PS-3415?
Power off the terminal, open the memory compartment, align the notch on the module with the slot key, insert the module, and press down until the retaining clips lock it in place.
Will this CL9 DDR3 1333 module need replacement due to wear?
Solid-state memory has no moving parts, so it does not wear out under normal use; replacement is only needed if a fault develops or capacity requirements change.
What limits sustained throughput on this PC3-10600 stick?
The DDR3 1333 interface caps maximum bandwidth at the PC3-10600 rating, so continuous heavy workloads will hit that ceiling first.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
