Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3415 memory upgrade

SKU CH-W0Z3-5X80G

A 4GB DDR3 SODIMM module running at 1333MHz with CL9 latency for the POSIFLEX PS-3415 terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3415 terminal
  • DDR3 1333 speed for responsive operation
  • Low 1.35V voltage reduces power draw
  • 4GB capacity handles daily POS workloads
  • 204-pin SODIMM fits the memory slot

POS Terminal Memory Upgrade

This 4 GB DDR3 SODIMM is built specifically for the POSIFLEX PS-3415 fanless touch-screen terminal. It uses a 204-pin unbuffered non-ECC layout running at 1333 MHz with CL9 latency. The module draws 1.35 V and is tested for stable operation in point-of-sale workloads.

Thermals and Power in Service

Low-voltage 1.35 V operation keeps heat output minimal inside the sealed fanless chassis. No heat spreader is fitted, relying on the terminal's passive cooling design. Power draw stays within the platform's original memory budget, so the upgrade does not increase acoustic or thermal load.

When the Upgrade Makes Sense

Replacing a smaller 2 GB stick or adding a second module doubles the memory available to the POS application and operating system. The jump is worth it when the terminal runs multiple peripherals or newer software that exceeds the original capacity. Builders needing ECC or registered memory should look elsewhere.

Ciri-ciri utama

  • Designed for POSIFLEX PS-3415 terminal
  • DDR3 1333 speed for responsive operation
  • Low 1.35V voltage reduces power draw
  • 4GB capacity handles daily POS workloads
  • 204-pin SODIMM fits the memory slot

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

How do I install this 204-pin SODIMM into the POSIFLEX PS-3415?

Power off the terminal, open the memory compartment, align the notch on the module with the slot key, insert the module, and press down until the retaining clips lock it in place.

Will this CL9 DDR3 1333 module need replacement due to wear?

Solid-state memory has no moving parts, so it does not wear out under normal use; replacement is only needed if a fault develops or capacity requirements change.

What limits sustained throughput on this PC3-10600 stick?

The DDR3 1333 interface caps maximum bandwidth at the PC3-10600 rating, so continuous heavy workloads will hit that ceiling first.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.