Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM 64GB (4×16GB) DDR5-5600 CL46 1Rx8 1.1V UDIMM for ASUS Pro Q670M-CE-CSM memory upgrade

SKU CH-H7NM-G5P31

A 64 GB DDR5 kit of four 16 GB unbuffered UDIMMs running at 5600 MHz with CL46 latency and 1.1 V, validated for the ASUS Pro Q670M-CE-CSM motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • Exact-match 64 GB kit runs at DDR5-5600 CL46 1.1 V
  • Verified fit for ASUS Pro Q670M-CE-CSM 288-pin UDIMM slots
  • Major OEM chips tested for stability at rated speed
  • 1Rx8 non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with US-based technical support

64GB DDR5-5600 kit for ASUS Pro Q670M-CE-CSM

This 64GB kit contains four 16GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 latency and 1.1V operation. It is built as an exact-match upgrade for the ASUS Pro Q670M-CE-CSM motherboard, using 288-pin unbuffered non-ECC DIMMs with 1Rx8 organisation. Major OEM chips from Samsung, Micron or Hynix are tested for stability at the rated speed and timing.

Replaces slower or smaller DDR5 memory

The kit upgrades a system that currently runs lower-capacity or lower-speed DDR5 modules, provided the board follows the same population rules. The jump is worth it when the workload needs more than the existing capacity or when the memory controller can utilise the full 5600 MT/s data rate without downclocking. It does not suit builds that require ECC, registered DIMMs or a different DDR generation.

Fits four UDIMM slots on the target board

The modules occupy all four 288-pin slots on the ASUS Pro Q670M-CE-CSM, so the board must support 64GB total and the specified population order. No heat spreader is fitted, leaving maximum clearance for large CPU coolers. The 1.1V default voltage keeps power draw low, freeing headroom for other components. Verify the manual for approved DIMM sequence before installation.

Priekšrocības

  • Exact-match 64 GB kit runs at DDR5-5600 CL46 1.1 V
  • Verified fit for ASUS Pro Q670M-CE-CSM 288-pin UDIMM slots
  • Major OEM chips tested for stability at rated speed
  • 1Rx8 non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with US-based technical support

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASUS
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 288-pin DDR5 UDIMM modules fit the four DIMM slots on my ASUS Pro Q670M-CE-CSM motherboard?

Yes. The kit provides four 16 GB modules in the 288-pin DDR5 UDIMM form factor that the ASUS Pro Q670M-CE-CSM requires, matching the board's memory-population rules for a full 64 GB upgrade.

What is the correct order to populate the four slots with this 4×16 GB kit, and which step do builders often miss?

Install one module in each of the four slots following the sequence shown in the ASUS Pro Q670M-CE-CSM manual; the step most often missed is consulting that manual for the approved population order before seating the DIMMs.

Does the absence of a heat spreader on these 1Rx8 modules mean I will need extra cooling or replacement later?

No. The modules run at the standard 1.10 V DDR5 voltage with major OEM chips (Samsung, Micron, Hynix) and are tested for stability at 5600 MHz CL46, so no additional cooling or planned replacement is required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.