Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

NEMIX RAM

NEMIX RAM 64GB (4×16GB) DDR5-5600 CL46 1Rx8 1.1V UDIMM for ASUS Pro Q670M-CE-CSM memory upgrade

SKU CH-H7NM-G5P31

A 64 GB DDR5 kit of four 16 GB unbuffered UDIMMs running at 5600 MHz with CL46 latency and 1.1 V, validated for the ASUS Pro Q670M-CE-CSM motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • Exact-match 64 GB kit runs at DDR5-5600 CL46 1.1 V
  • Verified fit for ASUS Pro Q670M-CE-CSM 288-pin UDIMM slots
  • Major OEM chips tested for stability at rated speed
  • 1Rx8 non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with US-based technical support

64GB DDR5-5600 kit for ASUS Pro Q670M-CE-CSM

This 64GB kit contains four 16GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 latency and 1.1V operation. It is built as an exact-match upgrade for the ASUS Pro Q670M-CE-CSM motherboard, using 288-pin unbuffered non-ECC DIMMs with 1Rx8 organisation. Major OEM chips from Samsung, Micron or Hynix are tested for stability at the rated speed and timing.

Replaces slower or smaller DDR5 memory

The kit upgrades a system that currently runs lower-capacity or lower-speed DDR5 modules, provided the board follows the same population rules. The jump is worth it when the workload needs more than the existing capacity or when the memory controller can utilise the full 5600 MT/s data rate without downclocking. It does not suit builds that require ECC, registered DIMMs or a different DDR generation.

Fits four UDIMM slots on the target board

The modules occupy all four 288-pin slots on the ASUS Pro Q670M-CE-CSM, so the board must support 64GB total and the specified population order. No heat spreader is fitted, leaving maximum clearance for large CPU coolers. The 1.1V default voltage keeps power draw low, freeing headroom for other components. Verify the manual for approved DIMM sequence before installation.

Fordele

  • Exact-match 64 GB kit runs at DDR5-5600 CL46 1.1 V
  • Verified fit for ASUS Pro Q670M-CE-CSM 288-pin UDIMM slots
  • Major OEM chips tested for stability at rated speed
  • 1Rx8 non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with US-based technical support

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASUS
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will the 288-pin DDR5 UDIMM modules fit the four DIMM slots on my ASUS Pro Q670M-CE-CSM motherboard?

Yes. The kit provides four 16 GB modules in the 288-pin DDR5 UDIMM form factor that the ASUS Pro Q670M-CE-CSM requires, matching the board's memory-population rules for a full 64 GB upgrade.

What is the correct order to populate the four slots with this 4×16 GB kit, and which step do builders often miss?

Install one module in each of the four slots following the sequence shown in the ASUS Pro Q670M-CE-CSM manual; the step most often missed is consulting that manual for the approved population order before seating the DIMMs.

Does the absence of a heat spreader on these 1Rx8 modules mean I will need extra cooling or replacement later?

No. The modules run at the standard 1.10 V DDR5 voltage with major OEM chips (Samsung, Micron, Hynix) and are tested for stability at 5600 MHz CL46, so no additional cooling or planned replacement is required.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.