Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1.1V UDIMM Supermicro X13SAW-F memory upgrade

SKU CH-ZPDZ-E31CE

64 GB DDR5 kit of four 16 GB UDIMMs at 5600 MHz CL46 1.1 V for Supermicro X13SAW-F

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 10 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor matches Supermicro X13SAW-F motherboard slots exactly
  • Built with Samsung, Micron or Hynix chips tested for stability at rated specifications

64GB DDR5 kit for Supermicro X13SAW-F

This 64GB kit contains four 16GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 timings at 1.1V. It is built as an exact-match upgrade for the Supermicro X13SAW-F motherboard using major OEM chips.

Suits builders populating four slots on this board.

The non-ECC unbuffered design fits the desktop memory controller on the X13SAW-F. Buyers who need error-correcting memory for server workloads or who must use registered DIMMs should look at a different module type.

Four ranks deliver 64GB at rated speed.

Each 1Rx8 module provides one rank, giving four ranks total across the kit for full 64GB capacity at DDR5-5600. The fixed CL46 latency and 1.1V voltage leave no manual overclocking margin, so the kit runs at its rated specification.

Priekšrocības

  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 10 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor matches Supermicro X13SAW-F motherboard slots exactly
  • Built with Samsung, Micron or Hynix chips tested for stability at rated specifications

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

My Supermicro X13SAW-F has four DDR5 slots — will this 64 GB 4×16 GB kit fill all of them at once?

Yes, the kit contains four 16 GB UDIMMs for a total of 64 GB, matching the four DDR5 slots on the X13SAW-F so you can populate every slot in a single upgrade.

I plan to keep my existing DDR5 4800 modules — will this CL46 5600 kit run at the slower speed without issues?

The modules are rated for DDR5 5600 CL46 at 1.1 V; when mixed with slower DDR5 the memory controller will down-clock all DIMMs to the lowest common speed, typically 4800, and they will operate at that speed.

After installing the four sticks, how can I confirm the system sees the full 64 GB at 5600 MT/s?

Enter the BIOS or use a tool such as CPU-Z; the memory tab should show 64 GB total capacity, 5600 MT/s data rate, CL46 timings and 1.1 V operating voltage for each of the four DIMMs.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.