نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1.1V UDIMM Supermicro X13SAW-F memory upgrade

SKU CH-ZPDZ-E31CE

64 GB DDR5 kit of four 16 GB UDIMMs at 5600 MHz CL46 1.1 V for Supermicro X13SAW-F

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 4X16GB

  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 10 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor matches Supermicro X13SAW-F motherboard slots exactly
  • Built with Samsung, Micron or Hynix chips tested for stability at rated specifications

64GB DDR5 kit for Supermicro X13SAW-F

This 64GB kit contains four 16GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 timings at 1.1V. It is built as an exact-match upgrade for the Supermicro X13SAW-F motherboard using major OEM chips.

Suits builders populating four slots on this board.

The non-ECC unbuffered design fits the desktop memory controller on the X13SAW-F. Buyers who need error-correcting memory for server workloads or who must use registered DIMMs should look at a different module type.

Four ranks deliver 64GB at rated speed.

Each 1Rx8 module provides one rank, giving four ranks total across the kit for full 64GB capacity at DDR5-5600. The fixed CL46 latency and 1.1V voltage leave no manual overclocking margin, so the kit runs at its rated specification.

أبرز المميزات

  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 10 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor matches Supermicro X13SAW-F motherboard slots exactly
  • Built with Samsung, Micron or Hynix chips tested for stability at rated specifications

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

My Supermicro X13SAW-F has four DDR5 slots — will this 64 GB 4×16 GB kit fill all of them at once?

Yes, the kit contains four 16 GB UDIMMs for a total of 64 GB, matching the four DDR5 slots on the X13SAW-F so you can populate every slot in a single upgrade.

I plan to keep my existing DDR5 4800 modules — will this CL46 5600 kit run at the slower speed without issues?

The modules are rated for DDR5 5600 CL46 at 1.1 V; when mixed with slower DDR5 the memory controller will down-clock all DIMMs to the lowest common speed, typically 4800, and they will operate at that speed.

After installing the four sticks, how can I confirm the system sees the full 64 GB at 5600 MT/s?

Enter the BIOS or use a tool such as CPU-Z; the memory tab should show 64 GB total capacity, 5600 MT/s data rate, CL46 timings and 1.1 V operating voltage for each of the four DIMMs.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.