เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1.1V UDIMM Supermicro X13SAW-F memory upgrade

SKU CH-ZPDZ-E31CE

64 GB DDR5 kit of four 16 GB UDIMMs at 5600 MHz CL46 1.1 V for Supermicro X13SAW-F

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 10 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor matches Supermicro X13SAW-F motherboard slots exactly
  • Built with Samsung, Micron or Hynix chips tested for stability at rated specifications

64GB DDR5 kit for Supermicro X13SAW-F

This 64GB kit contains four 16GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 timings at 1.1V. It is built as an exact-match upgrade for the Supermicro X13SAW-F motherboard using major OEM chips.

Suits builders populating four slots on this board.

The non-ECC unbuffered design fits the desktop memory controller on the X13SAW-F. Buyers who need error-correcting memory for server workloads or who must use registered DIMMs should look at a different module type.

Four ranks deliver 64GB at rated speed.

Each 1Rx8 module provides one rank, giving four ranks total across the kit for full 64GB capacity at DDR5-5600. The fixed CL46 latency and 1.1V voltage leave no manual overclocking margin, so the kit runs at its rated specification.

จุดเด่น

  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 10 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor matches Supermicro X13SAW-F motherboard slots exactly
  • Built with Samsung, Micron or Hynix chips tested for stability at rated specifications

ข้อมูลจำเพาะ

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

My Supermicro X13SAW-F has four DDR5 slots — will this 64 GB 4×16 GB kit fill all of them at once?

Yes, the kit contains four 16 GB UDIMMs for a total of 64 GB, matching the four DDR5 slots on the X13SAW-F so you can populate every slot in a single upgrade.

I plan to keep my existing DDR5 4800 modules — will this CL46 5600 kit run at the slower speed without issues?

The modules are rated for DDR5 5600 CL46 at 1.1 V; when mixed with slower DDR5 the memory controller will down-clock all DIMMs to the lowest common speed, typically 4800, and they will operate at that speed.

After installing the four sticks, how can I confirm the system sees the full 64 GB at 5600 MT/s?

Enter the BIOS or use a tool such as CPU-Z; the memory tab should show 64 GB total capacity, 5600 MT/s data rate, CL46 timings and 1.1 V operating voltage for each of the four DIMMs.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที