نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2933MHz PC4-23400 CL21 1.2V 1Rx8 288-Pin UDIMM memory upgrade

SKU CH-TEQY-48NKP

16 GB DDR4 2933 MHz CL21 1.2 V 288-pin UDIMM validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 16GB

  • Exact-match DDR4-2933 upgrade for Supermicro X12SAE/X12SCA-F boards
  • 16 GB capacity at 1.2 V CL21 for rated-speed performance
  • Built with Samsung, Micron or Hynix chips tested for stability
  • 288-pin UDIMM form factor fits desktop motherboard slots
  • Lifetime replacement warranty with US-based technical support

16 GB DDR4 2933 MHz UDIMM for Supermicro X12SAE /

This 16 GB DDR4-2933 module matches the exact rank, voltage and timing the Supermicro X12SAE and X12SCA-F memory controllers expect. It is a Non-ECC Unbuffered 288-pin UDIMM built with major OEM chips from Samsung, Micron or Hynix. The single-rank 1Rx8 organisation and CL21 latency at 1.20 V allow the board to recognise full capacity at rated speed.

Installation notes and common issues

The DIMM slots into a standard 288-pin DDR4 socket with no heat spreader to clear, so physical fit is straightforward. The main risk is population order: these boards have specific slot-filling rules and maximum capacity limits per channel. Consult the motherboard manual for the approved sequence before installing, otherwise the system may not post or may run at reduced speed.

Suitability and alternatives

This kit suits owners of Supermicro X12SAE or X12SCA-F motherboards who need a verified 16 GB DDR4-2933 upgrade with lifetime replacement coverage. Builders requiring ECC error correction, registered modules, SODIMM form factor or capacities beyond what the board supports should look elsewhere.

أبرز المميزات

  • Exact-match DDR4-2933 upgrade for Supermicro X12SAE/X12SCA-F boards
  • 16 GB capacity at 1.2 V CL21 for rated-speed performance
  • Built with Samsung, Micron or Hynix chips tested for stability
  • 288-pin UDIMM form factor fits desktop motherboard slots
  • Lifetime replacement warranty with US-based technical support

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-618K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I confirm the 16GB DDR4 2933MHz module is running at CL21 and 1.20V after installation?

Enter the BIOS or UEFI and verify the memory tab reports 2933 MT/s, CL21 timings, 1.20 V and 16 GB recognised.

What comes in the package and do I need any extra parts?

The box contains one 16 GB 288-pin DDR4 UDIMM; no heat spreader, cables or tools are included or required.

Which capacity and rank should I choose for a Supermicro X12SAE or X12SCA-F board?

This 16 GB 1Rx8 kit matches the motherboard's validated DDR4 2933 PC4-23400 specification; select it when your manual calls for a single-rank 16 GB unbuffered DIMM.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.