我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2933MHz PC4-23400 CL21 1.2V 1Rx8 288-Pin UDIMM memory upgrade

SKU CH-TEQY-48NKP

16 GB DDR4 2933 MHz CL21 1.2 V 288-pin UDIMM validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 16GB

  • Exact-match DDR4-2933 upgrade for Supermicro X12SAE/X12SCA-F boards
  • 16 GB capacity at 1.2 V CL21 for rated-speed performance
  • Built with Samsung, Micron or Hynix chips tested for stability
  • 288-pin UDIMM form factor fits desktop motherboard slots
  • Lifetime replacement warranty with US-based technical support

16 GB DDR4 2933 MHz UDIMM for Supermicro X12SAE /

This 16 GB DDR4-2933 module matches the exact rank, voltage and timing the Supermicro X12SAE and X12SCA-F memory controllers expect. It is a Non-ECC Unbuffered 288-pin UDIMM built with major OEM chips from Samsung, Micron or Hynix. The single-rank 1Rx8 organisation and CL21 latency at 1.20 V allow the board to recognise full capacity at rated speed.

Installation notes and common issues

The DIMM slots into a standard 288-pin DDR4 socket with no heat spreader to clear, so physical fit is straightforward. The main risk is population order: these boards have specific slot-filling rules and maximum capacity limits per channel. Consult the motherboard manual for the approved sequence before installing, otherwise the system may not post or may run at reduced speed.

Suitability and alternatives

This kit suits owners of Supermicro X12SAE or X12SCA-F motherboards who need a verified 16 GB DDR4-2933 upgrade with lifetime replacement coverage. Builders requiring ECC error correction, registered modules, SODIMM form factor or capacities beyond what the board supports should look elsewhere.

商品特色

  • Exact-match DDR4-2933 upgrade for Supermicro X12SAE/X12SCA-F boards
  • 16 GB capacity at 1.2 V CL21 for rated-speed performance
  • Built with Samsung, Micron or Hynix chips tested for stability
  • 288-pin UDIMM form factor fits desktop motherboard slots
  • Lifetime replacement warranty with US-based technical support

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-618K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I confirm the 16GB DDR4 2933MHz module is running at CL21 and 1.20V after installation?

Enter the BIOS or UEFI and verify the memory tab reports 2933 MT/s, CL21 timings, 1.20 V and 16 GB recognised.

What comes in the package and do I need any extra parts?

The box contains one 16 GB 288-pin DDR4 UDIMM; no heat spreader, cables or tools are included or required.

Which capacity and rank should I choose for a Supermicro X12SAE or X12SCA-F board?

This 16 GB 1Rx8 kit matches the motherboard's validated DDR4 2933 PC4-23400 specification; select it when your manual calls for a single-rank 16 GB unbuffered DIMM.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。