我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM ME25600-818K1 8GB DDR4 3200 CL22 ECC UDIMM for Supermicro X12STE-F X12STD-F memory upgrade

SKU CH-M6DA-GDWGG

8GB DDR4 3200 ECC UDIMM verified for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity8GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 8GB

  • ECC protection stops silent data corruption with single-bit error correction
  • Exact DDR4-3200 CL22 1.20V spec matches Supermicro X12STE-F memory controller
  • 288-pin unbuffered UDIMM form factor fits the board's required slot type
  • 1Rx8 single-rank organisation follows motherboard population rules for full recognition
  • Lifetime replacement warranty and free US-based technical support included

Exact-match upgrade for Supermicro X12STE-F

This 8GB DDR4 3200 ECC UDIMM is built to the precise rank, voltage, and timing the board's memory controller expects. The 288-pin unbuffered form factor matches the motherboard's requirements exactly so the module is recognised at full capacity and runs at its rated speed. It is intended for administrators upgrading or repairing those specific Supermicro platforms.

Sustained reliability

ECC circuitry detects and corrects single-bit errors continuously during operation, preventing silent data corruption and unplanned reboots under prolonged workloads. The 1.2V operating voltage and CL22 latency remain stable across extended sessions because the module uses major OEM chips validated for server duty. No heat spreader is fitted, relying on chassis airflow for thermal management.

DDR4 platform limits define the practical ceiling

The DDR4 3200 (PC4-25600) interface sets the maximum bandwidth and latency floor this module can deliver regardless of workload intensity. Population rules in the motherboard manual dictate how many such DIMMs can be installed and in which slots, capping total system capacity. Builders needing higher densities or registered DIMM support must select a different memory type not provided by this kit.

商品特色

  • ECC protection stops silent data corruption with single-bit error correction
  • Exact DDR4-3200 CL22 1.20V spec matches Supermicro X12STE-F memory controller
  • 288-pin unbuffered UDIMM form factor fits the board's required slot type
  • 1Rx8 single-rank organisation follows motherboard population rules for full recognition
  • Lifetime replacement warranty and free US-based technical support included

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-818K1
Capacity8GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power does the 1.20 V DDR4 3200 module draw when the system runs all day?

At the rated 1.20 V the 8 GB stick operates within standard DDR4 power limits, and the unbuffered design avoids the extra current a registered DIMM would need.

What must the motherboard provide for this 288-pin ECC UDIMM to function?

The board needs a DDR4 slot that accepts unbuffered ECC UDIMMs and follows the Supermicro X12STE-F or X12STD-F population rules for 1Rx8 modules.

Will the CL22 1Rx8 stick run at its rated speed alongside slower DDR4 modules already installed in the same board?

The memory controller will clock all populated slots to the lowest common speed, so the 3200 MT/s module will downshift to match the slower DIMMs.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。