BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278351BTC
Krājumā
NEMIX RAM
NEMIX RAM CSE-E101-04 16GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade
A 16 GB DDR5 SODIMM running at 4800 MHz with CL40 latency for SuperMicro IoT SuperServer SYS-E100-13AD-C systems
- Capacity16GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB DDR5 4800 CL40 boosts multitasking speed
- 1 V operation reduces system power draw
- 1Rx8 single-rank layout simplifies memory controller load
- 262-pin SODIMM fits SuperMicro IoT SuperServer SYS-E100-13AD-C
- Major OEM Samsung, Micron, Hynix chips ensure module reliability
Purpose-built DDR5 SODIMM
This NEMIX RAM module delivers 16 GB of DDR5 4800 memory in a 262-pin SODIMM form factor. It is validated for the SuperMicro IoT SuperServer SYS-E100-13AD-C and the X13SAN-C and X13SAN-C-WOHS motherboards. The stick runs at 1.10 V with CL40 latency and uses a single-rank 1Rx8 organisation built from major OEM DRAM.
Ideal for targeted server upgrades
Administrators expanding the memory of the listed SuperMicro platforms can install this non-ECC unbuffered SODIMM directly. Builders who need ECC error correction, registered buffering, a different voltage, a DIMM form factor or capacities other than 16 GB should look elsewhere.
Deciding specification
The 262-pin DDR5 SODIMM interface combined with non-ECC unbuffered operation at 4800 MT/s and 1.10 V determines whether this module fits the slot and meets the electrical requirements of the target SuperMicro systems.
Priekšrocības
- 16 GB DDR5 4800 CL40 boosts multitasking speed
- 1 V operation reduces system power draw
- 1Rx8 single-rank layout simplifies memory controller load
- 262-pin SODIMM fits SuperMicro IoT SuperServer SYS-E100-13AD-C
- Major OEM Samsung, Micron, Hynix chips ensure module reliability
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-618K1 |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM |
Jautājumi par šo preci
Will this DDR5 4800 CL40 SODIMM run in my SuperMicro SYS-E100-13AD-C alongside existing DDR5 modules?
The module is built for the SuperMicro SYS-E100-13AD-C and other listed SuperMicro platforms. Match speed, voltage, rank and CAS latency with any modules already installed for stable operation.
How can I verify the 16GB DDR5 4800 module is detected and running at CL40 after installation?
Check the BIOS or UEFI memory information screen. It should show 16 GB capacity, 4800 MT/s data rate and CL40 timings at 1.10 V.
Does the package include only the 262-pin SODIMM or are any tools or brackets supplied?
The box contains one 16GB 262-pin DDR5 SODIMM. No tools, brackets or additional components are included.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
