暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black chips, 262 gold pins, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E101-04 16GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade

SKU CH-6P1W-6736Y MPN CSE-E101-04

A 16 GB DDR5 SODIMM running at 4800 MHz with CL40 latency for SuperMicro IoT SuperServer SYS-E100-13AD-C systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • 1 V operation reduces system power draw
  • 1Rx8 single-rank layout simplifies memory controller load
  • 262-pin SODIMM fits SuperMicro IoT SuperServer SYS-E100-13AD-C
  • Major OEM Samsung, Micron, Hynix chips ensure module reliability

Purpose-built DDR5 SODIMM

This NEMIX RAM module delivers 16 GB of DDR5 4800 memory in a 262-pin SODIMM form factor. It is validated for the SuperMicro IoT SuperServer SYS-E100-13AD-C and the X13SAN-C and X13SAN-C-WOHS motherboards. The stick runs at 1.10 V with CL40 latency and uses a single-rank 1Rx8 organisation built from major OEM DRAM.

Ideal for targeted server upgrades

Administrators expanding the memory of the listed SuperMicro platforms can install this non-ECC unbuffered SODIMM directly. Builders who need ECC error correction, registered buffering, a different voltage, a DIMM form factor or capacities other than 16 GB should look elsewhere.

Deciding specification

The 262-pin DDR5 SODIMM interface combined with non-ECC unbuffered operation at 4800 MT/s and 1.10 V determines whether this module fits the slot and meets the electrical requirements of the target SuperMicro systems.

特長

  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • 1 V operation reduces system power draw
  • 1Rx8 single-rank layout simplifies memory controller load
  • 262-pin SODIMM fits SuperMicro IoT SuperServer SYS-E100-13AD-C
  • Major OEM Samsung, Micron, Hynix chips ensure module reliability

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Will this DDR5 4800 CL40 SODIMM run in my SuperMicro SYS-E100-13AD-C alongside existing DDR5 modules?

The module is built for the SuperMicro SYS-E100-13AD-C and other listed SuperMicro platforms. Match speed, voltage, rank and CAS latency with any modules already installed for stable operation.

How can I verify the 16GB DDR5 4800 module is detected and running at CL40 after installation?

Check the BIOS or UEFI memory information screen. It should show 16 GB capacity, 4800 MT/s data rate and CL40 timings at 1.10 V.

Does the package include only the 262-pin SODIMM or are any tools or brackets supplied?

The box contains one 16GB 262-pin DDR5 SODIMM. No tools, brackets or additional components are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。