Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black chips, 262 gold pins, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E101-04 16GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade

SKU CH-6P1W-6736Y MPN CSE-E101-04

A 16 GB DDR5 SODIMM running at 4800 MHz with CL40 latency for SuperMicro IoT SuperServer SYS-E100-13AD-C systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • 1 V operation reduces system power draw
  • 1Rx8 single-rank layout simplifies memory controller load
  • 262-pin SODIMM fits SuperMicro IoT SuperServer SYS-E100-13AD-C
  • Major OEM Samsung, Micron, Hynix chips ensure module reliability

Purpose-built DDR5 SODIMM

This NEMIX RAM module delivers 16 GB of DDR5 4800 memory in a 262-pin SODIMM form factor. It is validated for the SuperMicro IoT SuperServer SYS-E100-13AD-C and the X13SAN-C and X13SAN-C-WOHS motherboards. The stick runs at 1.10 V with CL40 latency and uses a single-rank 1Rx8 organisation built from major OEM DRAM.

Ideal for targeted server upgrades

Administrators expanding the memory of the listed SuperMicro platforms can install this non-ECC unbuffered SODIMM directly. Builders who need ECC error correction, registered buffering, a different voltage, a DIMM form factor or capacities other than 16 GB should look elsewhere.

Deciding specification

The 262-pin DDR5 SODIMM interface combined with non-ECC unbuffered operation at 4800 MT/s and 1.10 V determines whether this module fits the slot and meets the electrical requirements of the target SuperMicro systems.

Pluspunten

  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • 1 V operation reduces system power draw
  • 1Rx8 single-rank layout simplifies memory controller load
  • 262-pin SODIMM fits SuperMicro IoT SuperServer SYS-E100-13AD-C
  • Major OEM Samsung, Micron, Hynix chips ensure module reliability

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM

Vragen over dit artikel

Will this DDR5 4800 CL40 SODIMM run in my SuperMicro SYS-E100-13AD-C alongside existing DDR5 modules?

The module is built for the SuperMicro SYS-E100-13AD-C and other listed SuperMicro platforms. Match speed, voltage, rank and CAS latency with any modules already installed for stable operation.

How can I verify the 16GB DDR5 4800 module is detected and running at CL40 after installation?

Check the BIOS or UEFI memory information screen. It should show 16 GB capacity, 4800 MT/s data rate and CL40 timings at 1.10 V.

Does the package include only the 262-pin SODIMM or are any tools or brackets supplied?

The box contains one 16GB 262-pin DDR5 SODIMM. No tools, brackets or additional components are included.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.