NEMIX RAM
NEMIX RAM 64GB DDR5 5600MHz PC5-44800 2Rx4 CL46 1.1V ECC Registered RDIMM GIGABYTE MZ73-LM2 memory upgrade
- 64GB
- 288-Pin DDR5 RDIMM
1 999,99 $
0.02558415BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 5600 CL46 64GB (4x16GB) ECC RDIMM memory upgrade
64 GB server memory kit with four 16 GB DDR5 5600 CL46 registered ECC RDIMMs for the GIGABYTE MZ33-CP1 motherboard
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
Size 64GB 4X16GB
- 64 GB kit lets you fully populate four slots with 16 GB each
- DDR5-5600 CL46 timing matches the board's rated speed and latency
- 1Rx8 registered ECC architecture offloads the controller and corrects single-bit errors
- 1 V operating voltage reduces power draw per module
- 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard exactly
System-specific DDR5-5600 ECC RDIMM kit
This 64 GB kit contains four 16 GB registered DDR5 modules rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for servers and workstations that require error-correcting code memory and the registered signal buffering that keeps every slot stable at full population.
Practical limits of the DDR5 RDIMM interface
The registered (buffered) architecture offloads the memory controller so all four slots can run fully populated at the rated 5600 MT/s speed. ECC corrects single-bit errors on the fly to prevent silent data corruption, but the modules only fit motherboards wired for 288-pin DDR5 RDIMMs — they will not work in UDIMM or SODIMM slots.
Compatibility decided by the GIGABYTE MZ33-CP1
This exact part number MR44800-618K4 is validated for the GIGABYTE MZ33-CP1 motherboard, matching its required rank, voltage and timing so the board recognises the full 64 GB at DDR5-5600. Buyers with any other platform must verify their manual for supported capacities and DIMM population rules before ordering.
Priekšrocības
- 64 GB kit lets you fully populate four slots with 16 GB each
- DDR5-5600 CL46 timing matches the board's rated speed and latency
- 1Rx8 registered ECC architecture offloads the controller and corrects single-bit errors
- 1 V operating voltage reduces power draw per module
- 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard exactly
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | GIGABYTE |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Citas šī modeļa versijas
Vēl 5 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
NEMIX RAM
NEMIX RAM 64GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM for GIGABYTE MZ73-LM1 memory upgrade
- 64GB
- 288-Pin DDR5 RDIMM
2 004,99 $
0.02564811BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 6400 64GB 2Rx4 CL52 1.1V ECC RDIMM GIGABYTE MZ73-LM0 memory upgrade
- 64GB
- 288-Pin DDR5 RDIMM
2 005,99 $
0.02566091BTC
Krājumā
NEMIX RAM
NEMIX RAM 64GB DDR5 6400 CL52 2Rx4 ECC RDIMM GIGABYTE MZ73-LM2 memory upgrade
- 64GB
- 288-Pin DDR5 RDIMM
2 017,99 $
0.02581441BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 64GB 4x16GB CL46 1.1V 288-pin Supermicro H14SSF
- 64GB (4 x 16GB)
- 288-Pin DDR5 RDIMM
2 017,99 $
0.02581441BTC
KrājumāJautājumi par šo preci
Should I pick the 4x16GB kit or a different capacity for my GIGABYTE MZ33-CP1?
The 4x16GB kit fills four slots with 64GB total, matching the board's DDR5 5600 registered DIMM requirements and 1Rx8 rank layout for full-speed operation.
What does DDR5 5600 actually deliver once installed in the server?
The modules run at 5600 MT/s with CL46 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for stable throughput.
How does the 288-pin RDIMM interface limit what I can install?
The 288-pin registered form factor is required by the MZ33-CP1; UDIMM or SODIMM modules will not fit or function in this server board.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501439BTC
Krājumā
