暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green 288-pin DDR5 RDIMM modules in a kit

NEMIX RAM

NEMIX RAM DDR5 5600 CL46 64GB (4x16GB) ECC RDIMM memory upgrade

SKU CH-A384-ZB27F

64 GB server memory kit with four 16 GB DDR5 5600 CL46 registered ECC RDIMMs for the GIGABYTE MZ33-CP1 motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

他に 24点の構成を表示
  • 64 GB kit lets you fully populate four slots with 16 GB each
  • DDR5-5600 CL46 timing matches the board's rated speed and latency
  • 1Rx8 registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage reduces power draw per module
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard exactly

System-specific DDR5-5600 ECC RDIMM kit

This 64 GB kit contains four 16 GB registered DDR5 modules rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for servers and workstations that require error-correcting code memory and the registered signal buffering that keeps every slot stable at full population.

Practical limits of the DDR5 RDIMM interface

The registered (buffered) architecture offloads the memory controller so all four slots can run fully populated at the rated 5600 MT/s speed. ECC corrects single-bit errors on the fly to prevent silent data corruption, but the modules only fit motherboards wired for 288-pin DDR5 RDIMMs — they will not work in UDIMM or SODIMM slots.

Compatibility decided by the GIGABYTE MZ33-CP1

This exact part number MR44800-618K4 is validated for the GIGABYTE MZ33-CP1 motherboard, matching its required rank, voltage and timing so the board recognises the full 64 GB at DDR5-5600. Buyers with any other platform must verify their manual for supported capacities and DIMM population rules before ordering.

特長

  • 64 GB kit lets you fully populate four slots with 16 GB each
  • DDR5-5600 CL46 timing matches the board's rated speed and latency
  • 1Rx8 registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage reduces power draw per module
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I pick the 4x16GB kit or a different capacity for my GIGABYTE MZ33-CP1?

The 4x16GB kit fills four slots with 64GB total, matching the board's DDR5 5600 registered DIMM requirements and 1Rx8 rank layout for full-speed operation.

What does DDR5 5600 actually deliver once installed in the server?

The modules run at 5600 MT/s with CL46 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for stable throughput.

How does the 288-pin RDIMM interface limit what I can install?

The 288-pin registered form factor is required by the MZ33-CP1; UDIMM or SODIMM modules will not fit or function in this server board.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。