暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 64GB 4x16GB CL46 1.1V 288-pin Supermicro H14SSF

SKU CH-86C9-TKQDE

64 GB registered ECC DDR5 kit in four 16 GB modules running at 5600 MHz CL46 and 1.1 V for the Supermicro H14SSF motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from four matched 16 GB modules
  • DDR5-5600 speed with CL46 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation at 288-pin RDIMM form factor for Supermicro H14SSF fitment
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

Exact-match server upgrade

This 64GB kit delivers four 16GB DDR5-5600 Registered ECC RDIMMs built to the precise 1Rx8 rank, 1.1V voltage and CL46 timing the Supermicro H14SSF memory controller expects so the system recognises full capacity at rated speed.

Registered RDIMM form factor

The 288-pin Registered design offloads the memory controller allowing every slot to run fully populated at full capacity while on-die ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots in production workloads.

Kit contents only

The package supplies the four matched modules and nothing else so installation relies entirely on the motherboard manual for approved population order and seating procedure with no additional software or accessories to configure.

特長

  • 64 GB total capacity from four matched 16 GB modules
  • DDR5-5600 speed with CL46 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation at 288-pin RDIMM form factor for Supermicro H14SSF fitment
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does DDR5 5600 PC5-44800 actually run at?

The kit is rated for 5600 MT/s (PC5-44800) and will operate at that speed when the Supermicro H14SSF memory controller is configured for DDR5-5600.

What physical slot and clearance does this 288-pin RDIMM kit need?

Each module uses the standard 288-pin DDR5 RDIMM form factor and has no heat spreader, so it fits any H14SSF DIMM slot without extra height clearance.

How are the four 16 GB sticks installed on the H14SSF, and what step is often missed?

Populate the four slots in the exact order shown in the H14SSF manual; the step most often missed is following that specific population sequence so the board recognises the full 64 GB at 5600 MT/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。