Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OEM Industries
A 30 mm, 12 V micro fan drawing 1.4 W for compact CPU or hard-drive cooling
This OEM Industries DFS300612H is a 30 mm square micro fan designed for spot cooling in confined spaces such as small-form-factor chassis or hard-drive brackets. It runs on 12 V and draws 1.4 W through a two-pin connector, making it suitable for direct motherboard or controller connection. The black frame measures 30 by 30 by 6 mm and includes no LED lighting.
The cooler uses a standard two-pin power connector, so it will only work with headers or fan controllers that accept that interface. Buyers must verify their board or controller provides a matching two-pin header; three-pin or four-pin headers will not fit without an adapter. No PWM or voltage-control signalling is present on this model.
The package contains only the fan unit itself; no mounting screws, cables, adapters or software utilities are supplied. Installers must source their own fasteners and any required wiring. This keeps the product minimal but requires extra planning for first-time fits.
| Model | DFS300612H |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 30mm |
| Power Connector | 2 Pin |
| LED | No |
At 1.4 W the fan draws very little power, so it is suited to low-heat components such as a small-form-factor CPU or a hard drive rather than a high-TDP desktop processor.
A 2-pin connector supplies constant 12 V power with no PWM or tachometer signal, so the fan runs at a fixed speed and the motherboard cannot monitor or adjust its RPM.
The fan measures 30 mm square and 6 mm thick, so it fits any 30 mm mounting pattern with the standard hole spacing for that size.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?