Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OEM Industries
A 30 mm, 12 V micro fan drawing 1.4 W for compact CPU or hard-drive cooling
This OEM Industries DFS300612H is a 30 mm square micro fan designed for spot cooling in confined spaces such as small-form-factor chassis or hard-drive brackets. It runs on 12 V and draws 1.4 W through a two-pin connector, making it suitable for direct motherboard or controller connection. The black frame measures 30 by 30 by 6 mm and includes no LED lighting.
The cooler uses a standard two-pin power connector, so it will only work with headers or fan controllers that accept that interface. Buyers must verify their board or controller provides a matching two-pin header; three-pin or four-pin headers will not fit without an adapter. No PWM or voltage-control signalling is present on this model.
The package contains only the fan unit itself; no mounting screws, cables, adapters or software utilities are supplied. Installers must source their own fasteners and any required wiring. This keeps the product minimal but requires extra planning for first-time fits.
| Model | DFS300612H |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 30mm |
| Power Connector | 2 Pin |
| LED | No |
At 1.4 W the fan draws very little power, so it is suited to low-heat components such as a small-form-factor CPU or a hard drive rather than a high-TDP desktop processor.
A 2-pin connector supplies constant 12 V power with no PWM or tachometer signal, so the fan runs at a fixed speed and the motherboard cannot monitor or adjust its RPM.
The fan measures 30 mm square and 6 mm thick, so it fits any 30 mm mounting pattern with the standard hole spacing for that size.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?