Tripp Lite SMART2200RM2U 1950VA 1950W 120V UPS 7 Outlets 2U Rack/Tower
- 120V
- 80 - 151V; adjustab…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OEM Industries
A 30 mm, 12 V micro fan drawing 1.4 W for compact CPU or hard-drive cooling
This OEM Industries DFS300612H is a 30 mm square micro fan designed for spot cooling in confined spaces such as small-form-factor chassis or hard-drive brackets. It runs on 12 V and draws 1.4 W through a two-pin connector, making it suitable for direct motherboard or controller connection. The black frame measures 30 by 30 by 6 mm and includes no LED lighting.
The cooler uses a standard two-pin power connector, so it will only work with headers or fan controllers that accept that interface. Buyers must verify their board or controller provides a matching two-pin header; three-pin or four-pin headers will not fit without an adapter. No PWM or voltage-control signalling is present on this model.
The package contains only the fan unit itself; no mounting screws, cables, adapters or software utilities are supplied. Installers must source their own fasteners and any required wiring. This keeps the product minimal but requires extra planning for first-time fits.
| Model | DFS300612H |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 30mm |
| Power Connector | 2 Pin |
| LED | No |
At 1.4 W the fan draws very little power, so it is suited to low-heat components such as a small-form-factor CPU or a hard drive rather than a high-TDP desktop processor.
A 2-pin connector supplies constant 12 V power with no PWM or tachometer signal, so the fan runs at a fixed speed and the motherboard cannot monitor or adjust its RPM.
The fan measures 30 mm square and 6 mm thick, so it fits any 30 mm mounting pattern with the standard hole spacing for that size.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟