Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 6010 DC brushless fan with 4-pin connector

OEM Industries

OEM Industries FD6010U12D 6010 12V .30A 4Pin CPU cooler

SKU CH-92WJ-P2V3K

A 60 mm ball-bearing fan with a 4-pin PWM connector runs at 12 V and 0.30 A to cool graphics cards or compact CPU heatsinks

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Efficient cooling with 12 V 0.30 A brushless motor
  • Precise speed control via 4-pin PWM connector
  • Durable ball bearing extends operational lifespan
  • Compact 6010 form factor fits tight video-card spaces
  • Ready to install — new condition, no LED distraction

Compact 6010 frame fan

The OEM Industries FD6010U12D is a 12 V DC brushless fan built on a 6010 form factor and rated at .30 A. It targets system integrators and DIY builders who need a slim 4-pin PWM cooler for tight GPU or small-form-factor CPU layouts.

Four-wire PWM control

The single specification that decides fit is the 4-pin power connector, which enables motherboard or graphics-card PWM speed regulation. Without that header the fan cannot be governed by the host hardware, so verify the target board exposes a matching 4-pin socket before ordering.

Straightforward drop-in

Installation consists of aligning the four mounting holes and pressing the supplied screws through the fan frame into the heatsink or shroud. The ball bearing spins freely on first power-up, but the thin 6010 profile leaves little margin for cable routing; snagged wires are the most common cause of vibration noise after assembly.

Priekšrocības

  • Efficient cooling with 12 V 0.30 A brushless motor
  • Precise speed control via 4-pin PWM connector
  • Durable ball bearing extends operational lifespan
  • Compact 6010 form factor fits tight video-card spaces
  • Ready to install — new condition, no LED distraction

Specifikācijas

ModelFD6010U12D
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Jautājumi par šo preci

How much current does the 12V 0.30A rating mean the fan draws in a real build?

The fan is rated for 0.30 amps at 12 volts, so it draws a modest current that most motherboard headers can supply without issue.

What does the 4-pin connector let me control on this FD6010U12D?

The 4-pin PWM connector allows the motherboard to vary the fan speed automatically based on temperature, giving finer control than a 3-pin voltage-regulated header.

Will the 6010 frame size fit my video-card cooler bracket?

The 6010 designation indicates a 60 mm by 60 mm frame with 10 mm thickness, a common size for many GPU heatsink mounts; check your card's mounting holes before installing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.