Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 6010 DC brushless fan with 4-pin connector

OEM Industries

OEM Industries FD6010U12D 6010 12V .30A 4Pin CPU cooler

SKU CH-92WJ-P2V3K

A 60 mm ball-bearing fan with a 4-pin PWM connector runs at 12 V and 0.30 A to cool graphics cards or compact CPU heatsinks

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Efficient cooling with 12 V 0.30 A brushless motor
  • Precise speed control via 4-pin PWM connector
  • Durable ball bearing extends operational lifespan
  • Compact 6010 form factor fits tight video-card spaces
  • Ready to install — new condition, no LED distraction

Compact 6010 frame fan

The OEM Industries FD6010U12D is a 12 V DC brushless fan built on a 6010 form factor and rated at .30 A. It targets system integrators and DIY builders who need a slim 4-pin PWM cooler for tight GPU or small-form-factor CPU layouts.

Four-wire PWM control

The single specification that decides fit is the 4-pin power connector, which enables motherboard or graphics-card PWM speed regulation. Without that header the fan cannot be governed by the host hardware, so verify the target board exposes a matching 4-pin socket before ordering.

Straightforward drop-in

Installation consists of aligning the four mounting holes and pressing the supplied screws through the fan frame into the heatsink or shroud. The ball bearing spins freely on first power-up, but the thin 6010 profile leaves little margin for cable routing; snagged wires are the most common cause of vibration noise after assembly.

Puncte forte

  • Efficient cooling with 12 V 0.30 A brushless motor
  • Precise speed control via 4-pin PWM connector
  • Durable ball bearing extends operational lifespan
  • Compact 6010 form factor fits tight video-card spaces
  • Ready to install — new condition, no LED distraction

Specificații

ModelFD6010U12D
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Întrebări despre acest articol

How much current does the 12V 0.30A rating mean the fan draws in a real build?

The fan is rated for 0.30 amps at 12 volts, so it draws a modest current that most motherboard headers can supply without issue.

What does the 4-pin connector let me control on this FD6010U12D?

The 4-pin PWM connector allows the motherboard to vary the fan speed automatically based on temperature, giving finer control than a 3-pin voltage-regulated header.

Will the 6010 frame size fit my video-card cooler bracket?

The 6010 designation indicates a 60 mm by 60 mm frame with 10 mm thickness, a common size for many GPU heatsink mounts; check your card's mounting holes before installing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.