Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 6010 DC brushless fan with 4-pin connector

OEM Industries

OEM Industries FD6010U12D 6010 12V .30A 4Pin CPU cooler

SKU CH-92WJ-P2V3K

A 60 mm ball-bearing fan with a 4-pin PWM connector runs at 12 V and 0.30 A to cool graphics cards or compact CPU heatsinks

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Efficient cooling with 12 V 0.30 A brushless motor
  • Precise speed control via 4-pin PWM connector
  • Durable ball bearing extends operational lifespan
  • Compact 6010 form factor fits tight video-card spaces
  • Ready to install — new condition, no LED distraction

Compact 6010 frame fan

The OEM Industries FD6010U12D is a 12 V DC brushless fan built on a 6010 form factor and rated at .30 A. It targets system integrators and DIY builders who need a slim 4-pin PWM cooler for tight GPU or small-form-factor CPU layouts.

Four-wire PWM control

The single specification that decides fit is the 4-pin power connector, which enables motherboard or graphics-card PWM speed regulation. Without that header the fan cannot be governed by the host hardware, so verify the target board exposes a matching 4-pin socket before ordering.

Straightforward drop-in

Installation consists of aligning the four mounting holes and pressing the supplied screws through the fan frame into the heatsink or shroud. The ball bearing spins freely on first power-up, but the thin 6010 profile leaves little margin for cable routing; snagged wires are the most common cause of vibration noise after assembly.

Poudarki

  • Efficient cooling with 12 V 0.30 A brushless motor
  • Precise speed control via 4-pin PWM connector
  • Durable ball bearing extends operational lifespan
  • Compact 6010 form factor fits tight video-card spaces
  • Ready to install — new condition, no LED distraction

Specifikacije

ModelFD6010U12D
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Vprašanja o tem izdelku

How much current does the 12V 0.30A rating mean the fan draws in a real build?

The fan is rated for 0.30 amps at 12 volts, so it draws a modest current that most motherboard headers can supply without issue.

What does the 4-pin connector let me control on this FD6010U12D?

The 4-pin PWM connector allows the motherboard to vary the fan speed automatically based on temperature, giving finer control than a 3-pin voltage-regulated header.

Will the 6010 frame size fit my video-card cooler bracket?

The 6010 designation indicates a 60 mm by 60 mm frame with 10 mm thickness, a common size for many GPU heatsink mounts; check your card's mounting holes before installing.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.